2:Installation and Setup Loading the Laminate

Step 1. Remove the Lower Laminate Cassette; see Page 22.

Step 2. Open the cassette, and remove the laminate if present.

Step 3. Load the partial-width laminate into the cassette. Note that the collar on the laminate spool is on the end opposite the geared flange.

Collar

Step 4. Trim the partial-width laminate.

Step 5. Rotate the core to adjust the laminate overhang. Stop when the end of the laminate is even with the edge of the lips of the cassette.

Step 6. Install the cassette; see Page 27.

32

Zebra ZXP Series 8 Card Printer User’s Manual

P1045430-002

Page 36
Image 36
Zebra Technologies 8 user manual Collar