Zebra Technologies 8 user manual Printer Menu Information, Info Menu

3: Operation

Operator Control Panel (OCP)

Printer Menu Information

Info Menu

INFO Button

(Operating Mode Display)

	PRINTER INFO			Displays MCB FW Ver, HCB FW Ver, MAB FW Ver, MSN (Machine Serial Number),
				and PH S/N (Printhead Serial Number).
	NETWORK INFO			Displays DHCP, IP, Mask, GW, and MAC.
	RIBBON INFO			Displays Type, # Images, and % Remaining.
	FILM INFO			Displays Type, # Images, and % Remaining.
	PRINTHEAD USAGE			Displays Card Count and Printhead Lines.
	REJECT BIN			Displays Card Count.
	CONFIGURATION INFO			Displays RAM, Single or Dual Sided, and Options Installed: Mag, Encoder, Laminator.
	TEMPERATURE INFO			Displays Settings: Top and Bottom temperature; and Current Temperature: Top and Bottom.
	CAL LUT INFO			Displays Look-Up Table info for LUT1 and LUT2.
	WIRELESS INFO			Displays Settings: SSID, Channel Noise Floor, WEP, DHCP, IP, Mask, GW, and MAC. Only applies
				to Printers with the Wireless option installed.
	WIRELESS STATISTICS			Displays RX Bytes, Discards, TX Bytes, Discards, Errors; TX Success, TX Retry, RX Success,
				RX Duplicate, and RTS Success. Only applies to Printers with the Wireless option installed.
	LAMINATOR INFO *			Displays LCB, MAB, LSN, Top installed (yes/no), Bottom installed (yes/no).
	TOP LAMINATE INFO *			Displays P/N, Type, # Images, and % Remaining.
	BTM LAMINATE INFO *			Displays Type, # Images, and % Remaining.
LAM TEMPERATURE INFO *				Displays Settings: Top and Bottom temperature; and Current: Top and Bottom temperature.
LAMINATOR ODOMETER *				Displays Unit on (# days), Top on (# days), Bottom on (# days), # Laminated, # Processed.
		* Only applies to Printers with a Laminator.
	Info Menu
PREV	NEXT		EXIT

•Press the PREV button to move up the menu list

•Press the NEXT button to move down the menu list

•Press the EXIT button to return to the Operating Mode Display

P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 57