Zebra Technologies 8 Contact Station Smart Card Interface, Pin Smart Card Contact Points DB-9

F: Smart Card Options

Contact Station Smart Card Interface

When a command to the printer interface sends a card to the Smart Card Contact Station, the printer connects the Smart Card Contact Station to the female DB-9 connector on the rear of the printer.

DB-9 Connector location for

Smart Card Contact Station

An attached external Smart Card Programmer can be used to program Smart Card chips. The following table shows the Smart Card Contact Points.

Pin	Smart Card Contact Points	DB-9	Smart Card Contact Points
1	C1 (VCC)	6	C6 (Vpp)
2	C2 (Reset)	7	C7 (I/O)
3	C3 (Clock)	8	C8 (RFU)
4	C4 (RFU)	9	(GND when chip
5	C5 (GND)		is at station)

210 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002