B: Setting Custom Card Specifications 
B.4.2 Partial Transfer
Light or missing transfer on | Spotty transfer anywhere on | Light transfer on entire card |
the sides | the card |
|
Front of card
Partial transfer is usually caused by lack of energy being transferred to the card, i.e. the temperatures are too low or the speeds are too fast.
Step 1. Increase Front Transfer Temperature:
a.From the Card Specifications window, make a note of the default front transfer temperature settings; see Section B.3.
b.Increase the appropriate (single or double side) front transfer temperature by 5.
c.Click on the OK button.
d.Print a test card; see Section B.3.
e.Examine the test card.
•If there is noticeable improvement, continue increasing the front transfer temperature by 5, printing a test card, and examining the resulting card. Stop when the problem is corrected or there is no more improvement. If the problem is corrected, no more adjustment is required; otherwise go to Step 2.
•If there is no noticeable improvement, return the temperature to its default setting; and go to Step 2.
Zebra ZXP Series 8 Card Printer User’s Manual | 175 |
