Zebra Technologies 8 user manual Cleaning, Clean Printer, Side Card Path

5:ZXP Series Toolbox Cleaning

Cleaning

Clean Printer

The Clean Printer screen gives you the option to clean the printer via the Toolbox; refer to Section 6, for cleaning via the OCP.

•Side Card Path

When you click the Clean button, instructions will appear in the following sequence:

1.Remove the card hopper, and click the Next button.

2.Insert X Roller Cleaning Card in the side slot where the card hopper was located, and click the Clean button.

3.Wait until the cleaning process completes. The card will be ejected through the side slot.

4.Flip the cleaning card. Insert the card through the side slot. Click the Clean button.

5.Wait until the cleaning process completes. The card will be ejected through the side slot.

6.Observe the message, Side card path cleaning has been completed successfully.

7.Replace the card hopper, and click the Close button to conclude the side card path cleaning process.

118 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002