2: Installation and Setup

Loading the Laminate

Laminating Contact Smart Cards

The laminate for the top surface of a contact smart card has a repeating pattern of an index hole and a rectangular cutout to expose the card’s electrical contacts.

electrical contacts

rectangular cutout

index hole

Step 1. Remove the Upper Laminate Cassette; see Page 22.

Step 2. Open the cassette, and remove the laminate if present.

Step 3. Load the smart card laminate into the cassette; see Page 24.

Step 4. Cut the laminate, splitting the index hole as shown.

Cut the laminate, splitting the index hole

P1045430-002

Zebra ZXP Series 8 Card Printer User’s Manual

29

Page 33
Image 33
Zebra Technologies 8 user manual Laminating Contact Smart Cards