Care & Cleaning

Cleaning recommendations for the ceramic glass cooktop (continued)

Plastic or foods with a high sugar content: These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately. After turning the surface elements OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot surface (as illustrated). Allow the cooktop to cool, and use the same method for heavy or burned on soils.

Do not use the following on the ceramic glass cooktop:

•Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean.

•Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop.

•Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn and cause Special

Caution for Aluminum Foil and Aluminum Cooking Utensils

•Aluminum foil

Use of aluminum foil will damage the cooktop. Do not use under any circumstances.

•Aluminum utensils

Since the melting point of aluminum is much lower than that of other metals, care must be taken when aluminum pots or pans are used. Pans that boil dry may permanently damage cooktop by breaking, fusing to, or marking it.

Care and cleaning of stainless steel

Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Refer to the General Care & Cleaning table for detailed cleaning instructions.

Removing and replacing the lift-off oven door

CAUTION

The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.

To Remove Oven Door:

1.Open oven door completely (horizontal with floor -

See Figure 1).

2.Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 2). A tool such as a small flat-blade screwdriver may be required.

3.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

4.Close the door to the broil stop position (the oven door will stop into this position just before fully closing).

5.With the oven door in the broil stop position, lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 4).

To Replace Oven Door:

1.Firmly grasp both sides of oven door along the door sides (Do not use the oven door handle - See Figure 3).

2.Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 4). The hook of the hinge arms must be fully seated onto the roller pins.

3.Fully open the oven door (horizontal with floor - See

Figure 1).

4.Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges (See Figure 2) to the locked position.

5.Close the oven door.

Door Hinge locations

with oven door fully open

38

Figure 1

Figure 2

Page 37 Page 39
Page 38
Image 38
Frigidaire 318205804 manual Care and cleaning of stainless steel, Removing and replacing the lift-off oven door
Page 37 Page 39

318205804 specifications

The Frigidaire 318205804 is an essential component for a variety of Frigidaire ranges, specifically designed to enhance the cooking experience. This replacement part, known as a burner assembly, plays a crucial role in delivering consistent heat to facilitate precise cooking and baking. Its durable construction ensures reliability, making it an excellent choice for homeowners looking to maintain their kitchen appliances in top-notch condition.

One of the standout features of the Frigidaire 318205804 is its high-quality design, which allows it to withstand the rigors of everyday cooking. Made from robust materials, the burner assembly is engineered to resist wear and tear, ensuring prolonged usage without the risk of malfunction. This durability not only extends the lifespan of your appliance but also ensures safety during operation, minimizing the chances of unexpected failures while cooking.

In terms of technology, the Frigidaire 318205804 is equipped with innovative features that promote efficient heat distribution. This ensures that food is cooked evenly and thoroughly, reducing cooking times and enhancing overall meal quality. The burner assembly is designed to fit seamlessly into compatible Frigidaire range models, making installation straightforward and hassle-free. Users can expect a perfect fit that integrates with the existing components of their range, helping to restore its performance to optimal levels.

Moreover, the Frigidaire 318205804 is engineered with user convenience in mind. Its easy-to-clean design simplifies maintenance, allowing users to keep their cooking surfaces free from grime and buildup. This practicality is particularly beneficial in busy kitchens where time and cleanliness are of the essence.

Additionally, the Frigidaire 318205804 is compatible with various Frigidaire range models, enhancing its versatility across different kitchen setups. This wide compatibility means that homeowners can rely on this replacement part to meet their cooking needs without having to invest in a new appliance.

In summary, the Frigidaire 318205804 stands out as a vital component that enhances cooking efficiency, safety, and convenience. With its durable construction, efficient heat distribution technology, and user-friendly design, it emerges as a reliable choice for anyone looking to maintain or improve their Frigidaire ranges. Investing in the 318205804 burner assembly is a decision aimed at achieving better cooking results and maximizing the lifespan of kitchen appliances.
Top Page Image Contents