OPERATING
INSTRUCTIONS:
Once the Griddler™ is assembled properly and you are ready to begin cooking, turn the Selector to the left to choose the Griddle
function or to the right to choose the Grill/Panini function, depending on what you intend to cook. When the knob is turned to either function,
a red indicator light will illuminate to indicate that the power is on.
If you intend to use the Griddler™ as a Contact Grill, Panini Press or Open Grill, turn the Grill/Panini Control to the desired temperature for cooking. Settings range from Warm (150°F) to Sear (450°F).
If you intend to use the Griddler™ as a Griddle, turn the Griddle Control to the desired temperature for cooking. Temperature settings range from 200°F to 425°F.
It may take up to 10 minutes to reach operating temperature, depending on the temperature level that was set. When the thermostat has reached operating temperature, a green indicator light inside the chosen control will indicate that the Griddler™ is ready for cook- ing. During operation, the light will continue to turn on and off as the thermostat regulates the temperature. This is normal.
The temperature controls are used to set and maintain the temperature of the cooking surface. You may vary the setting of the control knob at any time during cooking, and may wish to do so depending on the types of foods on the cooking plate. Refer to the Cooked Food Temperature Chart of the Recipe Book for recommendations.
NOTE: The first time you use the Griddler™, it may have a slight odour and may smoke a bit. This is normal and common to appliances with nonstick surfaces.
User Maintenance:
*Never use metal utensils, as they will scratch the nonstick grill plate. Instead, use only wooden or
*Never leave plastic utensils in contact with the hot grill plate.
*In between recipes, scrape excess food buildup through grease channel and into drip cups, then wipe off any residue with a paper towel before proceeding with next recipe.
CLEANING AND CARE:
CAUTION: BEFORE CLEANING APPLIANCE, MAKE SURE IT HAS COOLED DOWN COMPLETELY.
Once you have finished cooking, turn the Selector Control to the OFF position and unplug the power cord from the wall outlet. Allow the unit to cool down for at least
30 minutes before handling.
Use the cleaning/scraping tool to remove any leftover food from the cooking plate. The scraping tool can be washed by hand or in the dishwasher.
Dispose of grease from drip cups. The drip cups can be cleaned by hand or in the dishwasher.
Press the Plate Release Buttons to remove plates from the housing. Be sure that the plates have cooled completely before handling
(at least 30 minutes). The cooking plates can be washed in the dishwasher. Do not use metallic objects such as knives or forks for cleaning.
Do not use a scouring pad for cleaning. The nonstick coating can be damaged.
If you have been cooking seafood, wipe the cooking plate with lemon juice to prevent seafood flavour transferring to the next recipe.
The housing base, cover and control knobs can be wiped clean with a soft, dry cloth. For tough stains, dampen cloth. Never use an abrasive cleaner or harsh pad.
STORAGE:
Always make sure the Griddler™ is cool and dry before storing.
The power cord can be wrapped around the back of the base for storing.
One set of cooking plates should be stored in the Griddler™ when not in use. The other set can be stored in a drawer or cabinet, along with the drip cups and scraping tool.
WARRANTY
Limited Three-Year Warranty
This warranty is available to consumers only. You are a consumer if you own a Cuisinart™ Griddler™ that was purchased at retail for personal, family or household use. This warranty is not available to retailers or other commercial purchaser or owners.
We warrant that your Cuisinart™ Griddler™ will be free of defects in materials and workmanship
5
