Setting OVEN controls

SETTING SELF-CLEAN CYCLE TIME LENGTH

The SELF CLEAN pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

To set the controls for a 3 hour Self-Cleaning cycle

to start immediately and shut off automatically

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period (default self-cleaning cycle time).

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and “DOOR” and icon will flash; the letters “CLn” will remain on in the display.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light and icon will stop flashing and remain on. Also, the oven

icon will appear in the display.

NOTE

Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

34

The SELF CLEAN and DELAY START pads controls the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in advance.

To set the control for the Self-Cleaning Cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30)

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “CLn” and “3:00” HR will show in the display. The control will automatically clean for a 3 hour period.

NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. “door Loc” will appear, a beep will sound and the “DOOR” and icon will flash; the letters “CLn” will appear in the display as soon the door is locked.

4.Press DELAY START. Enter the desired start time using the number pads 4 3 0.

5. Press START. “DELAY”, “DOOR” and will remain on.

6.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has

been locked the “DOOR” and icon indicator light will quit flashing and remain on.

7.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon “DELAY” will go out; “CLn” and oven icon will appear in the display.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, “door OPn” will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back

to the time of the day.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR, “door OPn”

will appear and the “DOOR” and icon will flash until the door is unlocked, the oven door can then be opened and the timer will revert back to the time of the day.

NOTE

Models B & C only, during self-clean cycle surface elements can not be used (see ESEC Lockout Feature)

Page 33 Page 35
Page 34
Image 34
Frigidaire 318205804 manual When the Self-Clean Cycle is Completed, Stopping or Interrupting a Self-Cleaning Cycle
Page 33 Page 35

318205804 specifications

The Frigidaire 318205804 is an essential component for a variety of Frigidaire ranges, specifically designed to enhance the cooking experience. This replacement part, known as a burner assembly, plays a crucial role in delivering consistent heat to facilitate precise cooking and baking. Its durable construction ensures reliability, making it an excellent choice for homeowners looking to maintain their kitchen appliances in top-notch condition.

One of the standout features of the Frigidaire 318205804 is its high-quality design, which allows it to withstand the rigors of everyday cooking. Made from robust materials, the burner assembly is engineered to resist wear and tear, ensuring prolonged usage without the risk of malfunction. This durability not only extends the lifespan of your appliance but also ensures safety during operation, minimizing the chances of unexpected failures while cooking.

In terms of technology, the Frigidaire 318205804 is equipped with innovative features that promote efficient heat distribution. This ensures that food is cooked evenly and thoroughly, reducing cooking times and enhancing overall meal quality. The burner assembly is designed to fit seamlessly into compatible Frigidaire range models, making installation straightforward and hassle-free. Users can expect a perfect fit that integrates with the existing components of their range, helping to restore its performance to optimal levels.

Moreover, the Frigidaire 318205804 is engineered with user convenience in mind. Its easy-to-clean design simplifies maintenance, allowing users to keep their cooking surfaces free from grime and buildup. This practicality is particularly beneficial in busy kitchens where time and cleanliness are of the essence.

Additionally, the Frigidaire 318205804 is compatible with various Frigidaire range models, enhancing its versatility across different kitchen setups. This wide compatibility means that homeowners can rely on this replacement part to meet their cooking needs without having to invest in a new appliance.

In summary, the Frigidaire 318205804 stands out as a vital component that enhances cooking efficiency, safety, and convenience. With its durable construction, efficient heat distribution technology, and user-friendly design, it emerges as a reliable choice for anyone looking to maintain or improve their Frigidaire ranges. Investing in the 318205804 burner assembly is a decision aimed at achieving better cooking results and maximizing the lifespan of kitchen appliances.
Top Page Image Contents