TROY Group Bluetooth Print Adapter manual

Page 24

1.Turn the phone on by holding down the No key for several seconds.

2.Push the right arrow key five times until you see 5 Extras.

3.Push the Yes key.

4.Push the 4 key to select Bluetooth.

5.Click the 3 key to discover the available Bluetooth devices on the network. You should get the message "Searching"

6.The WindConnect Bluetooth Print Adapter should appear in the list of available devices. Use the down arrow key to choose it and ten press the Yes key to select it.

7.Press the 1 key to select "Add to Paired".

8.Enter the passkey that you selected in the previous section and press Yes.

You can now print from the phone as follows:

1.Press the right arrow button one time. You should see "1 Phone Book" (if not, keep pressing it until you do).

2.Press the Yes key.

3.Press the 4 key to select "Business cards".

4.Press the 1 key to select "Send my own" (or select a specific card).

5.Press the 2 key to select "Via Bluetooth". You will see the message "Searching", and then you will get a list of the Bluetooth devices in the area.

6.Use the down arrow and press Yes to select the Print Adapter.

7.Press the 1 key to send the business card.

8.Press the 2 key to send via Bluetooth.

9.Press the 1 key to send to the WindConnect Bluetooth Print Adapter. You will get the messages "Connecting" and "Sending", after which the document will print.

3-6

Image 24
Contents User’s Guide Copyright Notice Contents Page Introduction WindowsTM System Requirements Installing WindConnect PrintAdapter Hardware Unpacking and HandlingWindConnect Connector, Switch, and LEDs Before Your BeginConnecting to the Printer Verifying Successful InstallationVerifying the Connection to the Printer Configuring Configuring the Bluetooth Software SuiteSoftware on Your PC Page Installing the Port Monitor Software Adding a Windows PrinterPage Page Printing the First Job Printing Additional Jobs Disconnecting Configuring Other DevicesUsing the WindConnect with a Handheld Computer PDA Discovering the WindConnect Printing from the PDA Page Using the WindConnect with Ericsson Mobile Phones Page Using Pin SignalSerial Port SET Port S1 Console Disabled Init Exit Troubleshooting If You Can’t PrintPage Where to Get Help Worldwide Web SupportContacting Troy Warranty Returning Products7Notices FCC Compliance Statement For United States UsersFor European Users Declaration of ConformityFor Canadian Users European Union EU United States of America and CanadaCanada IC notice