TROY Group 802.11b manual 10-2

Page 42

TCP/IP-based mail packages and dial-up Internet Service Providers. If you do not know which method you are using, consult your system manager.

2.Make sure that your E-mail server is capable of sending messages across the Internet. Alternatively, if you are communicating directly from the PC via a modem to an Internet Service Provider, make sure that you have an Internet mail account on the ISP, and that the PC is configured to send E-mail using this account.

3.Start the PrintraNet installation program from the CD ROM and follow the step-by-step instructions. You will need to know the following:

-The mail transport protocol: MAPI or WINSOCK

-The port name you wish to assign to the PrintraNet port (this port is used to access the remote TROY print server): The name must start with "PNET" and end with a number (for example, PNET3"). Note that each remote EtherWind print server must have a unique port name associated with it.

-E-Mail Address: Enter any unique legal Internet E-mail address for the remote EtherWind print server (for example, emailprinter@xyz.com). Note: Internet E-mail addresses cannot have spaces in them.

-Service Name: Enter the service name on the remote EtherWind print serv- er that you wish to use for printing. This is normally XCD_xxxxxx_P1 for the first parallel port, XCD_xxxxxx_S1 for the first serial port, XCD_xxxxxx_P2 for the second parallel port, or XCD_xxxxxx_S2 for the second serial port., where "xxxxxx" is the last six digits of the Ethernet address (the exact service names can be found by running the print server self-test). If you do not know the service name, you may leave this field blank and the default binary service will be used.

-Your E-Mail Address (WINSOCK users only): enter your E-mail address (for example, shari@abc.com).

-SMTP E-Mail Server (SMTP users only): Enter the IP address of your SMTP E-mail server (consult your network administrator if you do not know this address).

-Desired Notification: You may optionally have the remote EtherWind print server notify you when the job is complete or when the job fails or both when the job is complete and if it fails. Select the desired option and then enter the E-mail address where you want the notification sent (generally you would want the notification sent to your own E-mail address).

4.You must now create a printer on your Windows system using the standard Windows printer setup procedure. To do this, go the Start button, select Settings and then Printers. Select Add Printer to begin the printer installa- tion and follow the instructions on the screen.

10-2

Page 41 Page 43
Image 42
Page 41 Page 43
Contents User’s Guide Copyright Notice Contents Troubleshooting Where to Get HelpAd-Hoc Mode IntroductionSystem Requirements Operating Systems SupportedNetwork Protocols Supported IPX/SPX Page Installing EtherWind Print Server Hardware Before You BeginUnpacking the Print Server EtherWind Connectors, Switches, and LEDs Connecting to a Printer Verifying Successful InstallationVerifying the Connection to the Printer Connecting the EtherWind to an RS-232 Serial Device DB9 DTE DCESET Port S1 Console Enabled Page Configuring the EtherWind ConfiguringIP Settings EtherWind 802.11bPage Installing the Software Page Page Page STARTProgramsTROY GroupEtherWindWP-Admin STARTProgramsTROY GroupEtherWindXAdmin32Management Methods EtherWind Console Telnet DEC NCP DEC NCLNetwork Configuration Microsoft WindowsPage Page Additional Windows Configuration Methods Setting Up Printing MacOS 8.x ConfigurationConfiguring the Macintosh AppleTalk NetworkSetting Up Printing MacOS Directory ServicesThis section covers installation using the Novell client NetWare NetworkPage Select Print Services Quick Setup from the Tools menu Print Server Name windowPage Berkeley Unix Host Configuration Unix Network192.189.207.33xcdprinter Sun Solaris Configuration LaserPrinter\ Lp=\Mkdir /usr/spool/lpd/LaserPrinter Lp -dLaserJet filename HP/UX ConfigurationSelect Add Access to Remote Printer Check the box next to Remote Printer is on BSD SystemConfiguration on Other Systems Name of queue to add user selectable Activate the queue YesVMS LAT Host Configuration DEC LAT Network$SET Term LTAxx/PASSTHRU/PASSALL @filename PRINT/QUEUE=queuename filenameFile Server User Configuration File Server Queue ConfigurationBanyan Vines Print Server Configuration Printing Configuration Installing the Software on a Windows PC at the Local SitePrintraNet Internet 10-2 Adding a Second PrintraNet Destination Configuring the Remote Troy Print Server Printing to the Remote Troy Print Server 192.189.207.222mail.troy.com Troubleshooting and Maintenance Troubleshooting Printing ProblemsTroubleshooting Wireless Configuration Problems Troubleshooting Network Configuration Wireless Server Configuration Screen Fields Server NameSsid Wireless Mode Loading the Firmware11-6 11-7 Uninstalling the EtherWind Wireless Software Double-ClickAdd/Remove ProgramsChange/Remove Where to Get Help Worldwide Web SupportContacting Troy Warranty Returning ProductsFCC Compliance Statement For United States Users For European Users Declaration of ConformityRegulatory Information Canada IC notice

802.11b specifications

TROY Group 802.11b is a significant advancement in wireless networking technology, introduced in the late 1990s. Operating within the 2.4 GHz frequency band, 802.11b provided users with robust connectivity and established a foundation for future wireless standards. This protocol marked a transition from wired networking to wireless, enabling greater mobility and flexibility for users.

One of the main features of the 802.11b standard is its data transmission rate, which supports speeds of up to 11 Mbps. While this may seem modest by today’s standards, it was a groundbreaking achievement at the time. The 802.11b technology utilized Direct Sequence Spread Spectrum (DSSS) modulation, which allowed multiple data streams to coexist with minimal interference. This was crucial in environments with numerous wireless devices.

Security was another important consideration, and 802.11b incorporated Wired Equivalent Privacy (WEP) for data protection. WEP attempted to secure wireless transmissions by encrypting data packets, although it was later found to have vulnerabilities. Nevertheless, it was a starting point for securing wireless communication until more robust security protocols, such as WPA and WPA2, were developed.

The compatibility of 802.11b with earlier standards like 802.11 meant that devices could be mixed and matched, allowing for a smooth transition to wireless networks. With a typical range of around 100 to 300 feet, it was suitable for various environments, from homes to offices. In addition, the protocol facilitated peer-to-peer networking, allowing devices to communicate directly without the need for an access point.

In terms of hardware, 802.11b required compatible wireless network interface cards (NICs) and access points. These devices were increasingly integrated into laptops and desktops, leading to widespread adoption and the growing popularity of wireless networking in everyday life.

In conclusion, TROY Group 802.11b laid the groundwork for modern wireless communication. Its features, including data rates of up to 11 Mbps, DSSS modulation, and initial security measures like WEP, made it a pioneer in the industry. Although it has been succeeded by faster and more secure protocols, the legacy of 802.11b lives on as a crucial development in the evolution of wireless technology, setting the stage for the high-speed and secure connections that users enjoy today.
Top Page Image Contents