TROY Group 802.11b manual Connecting to a Printer, Verifying Successful Installation

Page 11

Connecting to a Printer

Follow these steps to connect the EtherWind wireless print server to your printer:

1.Attach the EtherWind to the desktop mounting base.

2.Make sure the printer is off.

3.Connect the parallel cable to the print server and the printer.

4.Plug the power cord from the power supply into a wall outlet or power strip.

5.Connect the the power supply to the EtherWind.

6.Turn the printer on.

Verifying Successful Installation

When the print server is powered on, the EtherWind will go through the follow- ing startup sequence:

◗It runs through a set of power-up diagnostics for a few seconds. If the EtherWind is operating properly, the yellow and green LEDs will blink momentarily and then go out. If the green light blinks continuously in a regu- lar patter, there is a problem. Try unplugging the power and then plugging it in again. If the problem persists, contact TROY.

◗When a successful connection is made to the EtherWind from another

802.11b wireless device like an access point or PC, the yellow light will stay lit. The green light will blink whenever there is wireless networking activity.

Verifying the Connection to the Printer

Before attempting to print, it is very important to verify the connection between the EtherWind and the printer. If this connection is not good, you will not be able to print!

To verify this connection, make sure that both the EtherWind and the printer are powered on and ready. Make sure that the cable is connected securely from the EtherWind to the printer. Then print a test page by pushing the test switch and letting go immediately.

If the test page does not print, first make sure all the connections are secure, and make sure the printer is operating correctly and is not out of ink, toner, paper, etc. Then power the EtherWind off and then on again, and try printing the self-test page again.

If you cannot print a test page, refer to the Troubleshooting section of this manual.

1-3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents User’s Guide Copyright Notice Contents Where to Get Help TroubleshootingIntroduction Ad-Hoc ModeNetwork Protocols Supported System RequirementsOperating Systems Supported IPX/SPX Page Unpacking the Print Server Installing EtherWind Print Server HardwareBefore You Begin EtherWind Connectors, Switches, and LEDs Verifying the Connection to the Printer Connecting to a PrinterVerifying Successful Installation DB9 DTE DCE Connecting the EtherWind to an RS-232 Serial DeviceSET Port S1 Console Enabled Page EtherWind 802.11b ConfiguringIP Settings Configuring the EtherWindPage Installing the Software Page Page Page Management Methods STARTProgramsTROY GroupEtherWindWP-AdminSTARTProgramsTROY GroupEtherWindXAdmin32 Telnet DEC NCP DEC NCL EtherWind ConsoleMicrosoft Windows Network ConfigurationPage Page Additional Windows Configuration Methods AppleTalk Network ConfigurationConfiguring the Macintosh Setting Up Printing MacOS 8.xDirectory Services Setting Up Printing MacOSNetWare Network This section covers installation using the Novell clientPage Print Server Name window Select Print Services Quick Setup from the Tools menuPage 192.189.207.33xcdprinter Berkeley Unix Host ConfigurationUnix Network Mkdir /usr/spool/lpd/LaserPrinter Sun Solaris ConfigurationLaserPrinter\ Lp=\ Check the box next to Remote Printer is on BSD System HP/UX ConfigurationSelect Add Access to Remote Printer Lp -dLaserJet filenameName of queue to add user selectable Activate the queue Yes Configuration on Other Systems$SET Term LTAxx/PASSTHRU/PASSALL VMS LAT Host ConfigurationDEC LAT Network PRINT/QUEUE=queuename filename @filenameBanyan Vines File Server User ConfigurationFile Server Queue Configuration Print Server Configuration PrintraNet Internet Printing ConfigurationInstalling the Software on a Windows PC at the Local Site 10-2 Adding a Second PrintraNet Destination Configuring the Remote Troy Print Server Printing to the Remote Troy Print Server 192.189.207.222mail.troy.com Troubleshooting Wireless Configuration Problems Troubleshooting and MaintenanceTroubleshooting Printing Problems Troubleshooting Network Configuration Server Name Wireless Server Configuration Screen FieldsSsid Loading the Firmware Wireless Mode11-6 11-7 Change/Remove Uninstalling the EtherWind Wireless SoftwareDouble-ClickAdd/Remove Programs Contacting Troy Where to Get HelpWorldwide Web Support Returning Products WarrantyFCC Compliance Statement For United States Users Declaration of Conformity For European UsersRegulatory Information Canada IC notice

802.11b specifications

TROY Group 802.11b is a significant advancement in wireless networking technology, introduced in the late 1990s. Operating within the 2.4 GHz frequency band, 802.11b provided users with robust connectivity and established a foundation for future wireless standards. This protocol marked a transition from wired networking to wireless, enabling greater mobility and flexibility for users.

One of the main features of the 802.11b standard is its data transmission rate, which supports speeds of up to 11 Mbps. While this may seem modest by today’s standards, it was a groundbreaking achievement at the time. The 802.11b technology utilized Direct Sequence Spread Spectrum (DSSS) modulation, which allowed multiple data streams to coexist with minimal interference. This was crucial in environments with numerous wireless devices.

Security was another important consideration, and 802.11b incorporated Wired Equivalent Privacy (WEP) for data protection. WEP attempted to secure wireless transmissions by encrypting data packets, although it was later found to have vulnerabilities. Nevertheless, it was a starting point for securing wireless communication until more robust security protocols, such as WPA and WPA2, were developed.

The compatibility of 802.11b with earlier standards like 802.11 meant that devices could be mixed and matched, allowing for a smooth transition to wireless networks. With a typical range of around 100 to 300 feet, it was suitable for various environments, from homes to offices. In addition, the protocol facilitated peer-to-peer networking, allowing devices to communicate directly without the need for an access point.

In terms of hardware, 802.11b required compatible wireless network interface cards (NICs) and access points. These devices were increasingly integrated into laptops and desktops, leading to widespread adoption and the growing popularity of wireless networking in everyday life.

In conclusion, TROY Group 802.11b laid the groundwork for modern wireless communication. Its features, including data rates of up to 11 Mbps, DSSS modulation, and initial security measures like WEP, made it a pioneer in the industry. Although it has been succeeded by faster and more secure protocols, the legacy of 802.11b lives on as a crucial development in the evolution of wireless technology, setting the stage for the high-speed and secure connections that users enjoy today.
Top Page Image Contents