Initial computer configuration and deployment
The computer includes a preinstalled system software image. After a brief software unbundling process, the computer is ready to use.
If you prefer to replace the preinstalled software image with a customized set of system and application software, you can deploy a customized software image by:
●Installing additional software applications after unbundling the preinstalled software image
●Using a disk cloning process to copy the contents from one hard disk drive to another
The HP Recovery Manager DVDs,
Support for specific features described in this guide can vary by model and software version. The best deployment method depends on the information technology environment and processes.
Installing a remote system
Remote system installation enables starting and setting up the computer using software and configuration information on a network server. This feature is usually used for system setup and configuration and can be used to:
●Deploy a software image on new PCs
●Format a hard disk drive
●Install application software or drivers
●Update the operating system, application software, or drivers
To initiate a remote system installation, press F12 when F12=Network Service Boot appears in the lower right corner of the HP logo screen. Follow the onscreen instructions to continue the installation process. The default boot order is a BIOS configuration setting that can be changed to always attempt a network boot.
Desktop management | 61 |
