HP Workstatio D3J88UT#ABA, Z220 F1J90UAABA, Z420 D3J34UT#ABA, B2B94UT B2B94UT#ABA manual All boots

Table 2-1Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT Workstations (continued)

Heading	Option	Description
Power	OS Power	Enables or disables:
	Management	●	Runtime Power Management
		● Idle Power Savings: Extended (default) or Normal; extended mode reduces
			processor power consumption when the CPU is idle
		● ACPI S3 PS2 Mouse Wakeup
		● Unique Sleep State Blink Rates
	Hardware Power	Enables or disables:
	Management	●	SATA Power Management
		● S5 Maximum Power Savings
	Thermal	Lets you set the minimum speed of the system fan when the CPU is idle.
Advanced2	Power-On Options	Sets the following:
		●	POST Mode:
			◦	QuickBoot—Do not clear memory or perform a memory test.
			◦	FullBoot—Memory test (count) on cold boot. Clears memory on all boots.
			◦	Clear Memory—No memory test (count) on cold boot. Clears memory on
				all boots.
			◦	FullBoot Every x Days—Memory count on first cold boot on or after the
				Xth day and no more memory counts until that boot occurs. Clears
				memory on all boots.
		●	POST Messages (Enabled/Disabled)
		● Press the ESC key for Startup Menu (Enabled/Disabled)
		● Option ROM Prompt (Enabled/Disabled)—Enabling this feature causes the
			computer to display a message before loading option ROMs.
		● After Power Loss—Lets you specify computer behavior after a power loss:
			◦	Power Off—Computer remains powered off when power is restored
				(default).
			◦	Power On—Computer automatically powers on when power is
				restored. (This lets you power on the computer using a power strip switch,
				if the computer is connected to an electric power strip.)
			◦	Previous state—Computer powers on automatically when power is
				restored only if computer was on when power was lost.

The Computer Setup (F10) Utility 49