HP B5P07UT B5P07UT#ABA, Z220 F1J90UAABA, Z420 D3J34UT#ABA, B2B94UT B2B94UT#ABA manual Hard Drive

Table 2-2Computer Setup (F10) Utility menu descriptions for the HP Z420, Z620, and the Z820 Workstations (continued)

Heading	Option	Description
		◦	Hard Drive
		◦	Network Controller
		Press Enter to drag a device to a preferred place. Press F5 to remove the device from
		consideration as a bootable device. Press F10 to accept.
		MS-DOS drive lettering assignments might not apply after an operating system other than
		MS-DOS has started.
		Boot devices can be disabled in the boot order process. These order changes are stored in
		the physical ROM when the F10 Setup changes are confirmed with File>Save Changes
		and Exit.
		You can temporarily override the boot order. To start one time from a device other than the
		default device specified in Boot Order, restart the workstation and press F9 when the
		F9=Boot Menu message appears on the screen. After POST completes, a list of bootable
		devices is displayed. Use the arrow keys to select the preferred bootable device and press
		Enter. The workstation then starts from the selected nondefault device for this one time.
	DPS Self-text	Select a drive—Lets you execute self-tests on SATA hard drives capable of performing Drive
		Protection System (DPS) self-tests.
		NOTE: This selection appears only when the system has one or more drives capable of
		performing the DPS self-tests.
Security	Setup Password	Enables you to set and enable a setup password for the administrator.
		If you create a setup password, you must use it to change workstation setup options, to
		flash the ROM, and to make changes to certain Plug and Play settings under Windows.
	Power-On	Enables you to set and enable the power-on password.
	Password
	Password Options	This option becomes available when you create a setup and/or power-on password. It
		provides these options:

● Lock Legacy Resources—Prevents the operating system from changing resources to serial, parallel, or diskette controller.

● Setup Browse Mode—Enables read-only functionality for password info.

● Password Prompt on F9 & F12—Enables a password prompt on a warm boot. ● Network Server Mode—Enables network server mode.

54 Chapter 2 System management