HP Z420 D3J34UT#ABA, Z220 F1J90UAABA Hard Disk-Provides information about the hard disk drives

Table 2-1Computer Setup (F10) Utility menu descriptions for the HP Z220 SFF and Z220 CMT Workstations (continued)

Heading	Option	Description
	Ignore Changes and	Exits computer setup without applying or saving changes.
	Exit
	Save Changes and Exit	Saves changes to system configuration and exits the computer setup.
Storage	Device Configuration	Lists installed storage devices and provides specific information about each device:
		● Hard Disk—Provides information about the hard disk drives.
		● CD-ROM—Provides information about the optical disk drives.
	Storage Options	Provides these options:
		● eSATA Port—Displays the internal SATA port(s) that are configured to operate
			as eSATA. Changing this to None provisions the port(s) as internal SATA.
		● SATA Emulation—Sets the SATA emulation mode with the following options:
			◦	RAID + AHCI—both the RAID and AHCI OPROMs execute. This
				emulation mode is the default and offers the best performance and most
				functionality.
			◦	IDE—offers standard SATA support. Some higher-numbered SATA ports
				may not be available in this mode.
		● Removable Media Boot (Enabled/Disabled)—Enabling allows the workstation
			to boot from removable media, such as a USB flash drive.
		● Max eSATA Speed—Configures eSATA port speeds:
			◦	Gen 2 (3.0 Gbps)
			◦	Gen 1 (1.5 Gbps)
	DPS Self-test	Select a drive—Lets you execute self-tests on SATA hard drives capable of
		performing Drive Protection System (DPS) self-tests.
		NOTE: This selection appears only when the system has one or more drives
		capable of performing the DPS self-tests.
	Boot Order	Lets you configure the boot order by physically reordering the menu entries. The
		default boot order is:
		●	EFI Boot Sources
			◦	USB Floppy/CD
			◦	USB Hard Drive
			◦	ATAPI CD/DVD Drive
		●	Legacy Boot Sources
			◦	ATAPI CD/DVD Drive
			◦	USB Floppy/CD

The Computer Setup (F10) Utility 45