HP Z420 D3J34UT#ABA, Z220 F1J90UAABA, B2B94UT B2B94UT#ABA, B5P07UT B5P07UT#ABA manual Amt

Table 2-2Computer Setup (F10) Utility menu descriptions for the HP Z420, Z620, and the Z820 Workstations (continued)

Heading	Option	Description
	Device Options	Enables you to set the following device options:
		● Num Lock State at Power-On (On or Off)
		● S5 Wake-on-LAN (Enable or Disable)
		● Internal speaker—(Enable or Disable)
		● NIC Option ROM1 Download (Enable or Disable)
		● NIC1 Option ROM1 Download (Enable or Disable)
		● SATA RAID Option ROM1 Download (Enable/EFI/Disable)
		● SAS Option ROM1 Download (Enable/EFI/Disable) (Not available on some
		workstations.)
		● SCU Option ROM Download (Enable/EFI/Disable) (Not available on some
		workstations.)
		● Multiprocessor (Activates a single core.)—(Enable or Disable)
		● Active Processor Cores—Selects a single core, or multiple cores per socket
		● Hyper-Threading—(Enable or Disable)
		● CECP Mode—(Enable or Disable)
	Slot Settings	Enable/disable the PCIe and PCI slots (1 - 7).
	AMT	Lets you set the following AMT (Intel Active Management Technology) configuration
	Configuration	options:
		● AMT (Enabled/Disabled)—Allows for remote discovery, repair and protection of
		networked workstations. Enabling the AMT function also enables the Network
		Controller (required for AMT to function correctly).
		● Unconfigure AMT/ME (Disabled/Enabled) 2—Restores AMT/ME defaults. When you
		save and exit after enabling this option, you will be prompted to complete the process
		upon restart. A Setup Password (even if one is set) does not need to be entered to
		complete the process.
		NOTE: Information about Intel AMT can be found at www.intel.com.
		● WatchDog Timer (Enabled/Disabled)—OS and BIOS WatchDog Timers can be set
		independently (in minutes):
		◦	OS WatchDog TimerTimer—Sets the OS WatchDog Timer
		◦	BIOS WatchDog Timer—Sets the BIOS WatchDog Timer

1Available on selected models

2These options should be used by advanced users only

The Computer Setup (F10) Utility 59