HP Z220 F1J90UAABA manual Power supply specifications, Z220 SFF Z220 CMT Z420 Z620 Z820

Power supply

Power supply specifications

All power supplies have these specifications:

●Wide-ranging, active Power Factor Correction (PFC)

●ENERGY STAR® qualified (configuration dependent)

●FEMP Standby Power compliant @115V (<2W in S5 – Power Off)

●Surge tolerant (withstands power surges up to 2000V)

NOTE: HP Z820 Workstation configurations in which the power load is over 900W and the power source is between 90V and 115V require special power consumption and cooling considerations. Refer to the Site Preparation Guide at http://www.hp.com/support/workstation_manuals.

Table 3-13	Power supply specifications
		Z220 SFF	Z220 CMT	Z420	Z620	Z820
Power supply		240W 90%	400W 90%	600W 90%	800W 90%	850W 88%	1125W 90%
		efficient	efficient	efficient	efficient	efficient	efficient *
Operating		90–264 VAC	90–269 VAC	90–269 VAC	90–269 VAC	90–269 VAC	90–269 VAC
voltage range
							100 VAC
Rated voltage		100–240 VAC	100–240 VAC	100–240 VAC	100–240 VAC	100–127 VAC	115 VAC
range						200–240 VAC
							200–240
							VAC
Rated line		50–60 Hz	50–60 Hz	50–60 Hz	50–60 Hz	50–60 Hz	50–60 Hz
frequency
Operating line
frequency		47–63 Hz	47-66 Hz	47-66 Hz	47-66 Hz	47-66 Hz	47-66 Hz
range
							12A
						11A @	@100VAC,
Rated input		4A	5.5A @	8A @	9.7A @	100-127V	12A @
							115-127
current			100-240 VAC	100-240 VAC	100-240 VAC	5.5A @
							VAC, 10A @
						200-240V	200-240
							VAC
Heat
dissipation,		601.2 btu/hr	630.2 btu/hr
typical				1365 btu/hr	1972 btu/hr	2142 btu/hr	2773 btu/hr
		(151.5 kcal/	(158.8 kcal/
(configuration				(344 kcal/hr)	(497 kcal/hr)	(540 kcal/hr)	(699 kcal/hr)
		hr)	hr)
and software
dependent)

Component replacement guidelines 107