HP B2B94UT B2B94UT#ABA, Z220 F1J90UAABA manual Activity Possible cause Recommended action, Cmos

Table 4-8Diagnostic lights and audible codes (continued)

Activity	Possible cause		Recommended action
Red Power LED blinks	Invalid ROM based on	CAUTION: Internal components might be powered even when
eight times, once every	bad checksum.	the computer is off. To prevent damage, disconnect the computer
second, followed by a		power cord before you remove a component.
two-second pause. Eight		1.	Clear CMOS.
beeps.
			NOTE: Refer to the Maintenance and Service Guide for
			the computer model for detailed information on clearing
			CMOS.
		2.	Upgrade the ROM using SoftPaq, either from the hard disk
			drive, CD, diskette, or USB removable device (for example,
			HP Drive Key). See the ROM Flash section of the
			Maintenance and Service Guide at http://www.hp.com/
			support/workstation_manuals. SoftPaq is a self-extracting
			executable, which contains instructions for its use, that
			enables you to upgrade the ROM. To download the Softpaq
			executable, visit http://www.hp.com/go/
			workstationsupport.
		3.	The problem might be on the system board. Contact HP for
			assistance.
		4.
Red Power LED blinks nine	System powers on but	1.	The problem might be on the system board. Contact HP for
times, once every second,	does not start.		assistance.
followed by a two-second		2.	The problem might be in the CPU. Contact HP for assistance.
pause. Nine beeps.

Diagnostic codes and errors 151