HP Z420 D3J34UT#ABA manual HP Z220 CMT Workstation rear panel components, 7Rear panel components

HP Z220 CMT Workstation rear panel components

Figure 1-7Rear panel components

Table 1-6	Component descriptions
1	Power cord connector		9	Power supply Built-In Self Test (BIST) LED
2	PS/2 keyboard connector (purple)		10	PS/2 mouse connector (green)
3	DVI-I connector		11	Universal chassis clamp opening
4	Display Port (DP) connector		12	Cable lock slot
5	USB 2.0 ports (4)	(black)	13	Padlock loop
6	USB 3.0 ports (2)	(blue)	14	RJ-45 network connector
7	Microphone connector (pink)		15	Audio line-in connector (blue)
8	Audio line-out connector (green)

NOTE: The DP and DVI-I ports are not supported when the system is configured with Intel Xeon E3-12x0 v2 processors. Also, if a discrete graphics card is installed these ports are disabled by default.

NOTE: Simultaneous usage of integrated Intel HD graphics and discrete graphics cards (in order to drive more than two displays) can be enabled using the Computer (F10) Setup Utility. However, HP recommends using only discrete graphics cards when attaching three or more displays.

10 Chapter 1 Hardware overview