HP Z420 Workstation specifications
| Intel® Series C602 chipset with: | |
| ● Support for the Intel® Xeon™ Processor | |
|
| including processors up to 150W |
| ● Integrated | |
Processor technology | ● | Microarchitecture improvements |
|
| |
| ● Large L3 cache for superior performance | |
| ● Intel QuickPath Interconnect (QPI) connects processors and I/O controller with speeds | |
|
| up to 8 GT/s |
| HP Liquid Cooling option is available for all Z420 processors and is required on the | |
| ||
|
| |
Power supply | ● 600W Gold, 90% efficient, | |
| auxiliary dongles on two separate 12V rails, ERP 0.5W, | |
|
| |
|
| |
| ● Dual | |
| ● Error checking and correcting | |
| ● Four | |
|
| for improved performance |
Memory technology | ● | Up to 64 GB system memory (8 GB DIMMs) |
● 1600 MHz 2, 4, 8 GB ECC unbuffered DIMMs
NOTE: Do not mix any of the different types (unbuffered, registered, and load reducing
DIMMs) of memory. The system will not boot and will produce a memory error.
NOTE: Distribute DIMMs across all memory channels for optimal performance.
Supports:
● PCIe Gen3 (PCIe3) bus speeds; can support two PCIe Gen3 graphics cards in PCIe3 x16 slots
● Up to 225W graphics or compute card in the primary graphics slot
Graphics cards
● A second graphics card in the second PCIe3 x16 slot
● Third and fourth 2D graphics cards in additional PCIe2 slots
● Combined power consumption of all cards cannot exceed 270W (subject to overall system power limitations and configuration restrictions)
● SATA RAID 0/1/5/10 on either AHCI or SCU
● SAS RAID 0/1/10 on SCU (requires PCIe SAS Controller)
● Ten SATA ports (2 AHCI 6 Gb/s, 4 AHCI 3 Gb/s, 4 SCU 3 Gb/s)
● Two ports capable of optional eSATA
I/O technology
● Four external USB 3.0 ports (2 front, 2 rear) ● Five external USB 2.0 ports (1 front, 4 rear) ● Six internal USB 2.0 ports
● Serial Attached SCSI (SAS) drives supported with
HP Z420 Workstation components | 21 |