Amplifier Choice, Cable Choice, Unpacking

AMPLIFIER CHOICE

Consult the product specification as this clearly shows the acceptable power range for amplifier matching to your speakers. The high peak power handling of Tannoy loudspeakers permits responsible use with more powerful amplifiers - please read the Warranty.

As with all loudspeaker systems, the power handling is a function of voice coil thermal capacity. Care should be taken to avoid overdriving any amplifier, as this will cause output overload resulting in ‘clipping’ or distortion within the output signal. This, if done for any extended period, will cause damage to the speakers.

Generally an amplifier of higher power that is running hard, but free of distortion, will do less damage to the loudspeaker than a lower power amplifier continually clipping. Remember also that a high powered amplifier running at less than 90% of output power generally sounds a great deal better than a lower powered example struggling to achieve 100%. An amplifier with insufficient drive capability will not allow the full performance of the loudspeakers to be realised.

CABLE CHOICE

Always use the best quality of cable available within your budget. High quality audio signals passing from the amplifier to the loudspeaker are unusual in their demands on the cable. Wide dynamic range and frequency bandwidth information has to coexist with the ability to transmit peak currents of at least 10 amps, without incurring any loss or signal impairment. This explains why the sound quality of the information reproduced by the loudspeakers is so dependent on the physical properties of the cables connecting them to the amplifier.

We would recommend that you always keep the cable runs the same length for left and right speakers. Remember, cable construction can affect the sound quality so be prepared to experiment to find a cable that suits your ear and audio system.

UNPACKING

To unpack the loudspeakers from their boxes remove tape from the top then fold the flaps right back before inverting the carton and contents. Lift the carton clear of the contents then remove all inner packaging (See fig.1)

Check carefully for any sign of transit damage. In this unlikely event, notify your shipping company and/or dealer as soon aspossible for advice.

It is recommended you store all the packaging to allow protected transport in future.

ACCESSORIES

Check the contents of each accessories box, as follows:

•Plinth section, front x 1

•Plinth section, rear x 1

•Plinth mounting screws x 8

•Floor coupling spikes x 4

•Spike locking wheels x 4

•Spike cups, for floor protection x 4

•Spike adjustment hex tool x 1

•Bi-wiring link cables x 4

Also:

•The front grille is provided in a separate pack within the carton x 1

•Foam port bungs, located in end packaging x 2

04_ DEFINITION DC10A OWNER’S MANUAL

DC10A specifications

The Tannoy DC10A is a flagship loudspeaker from the British audio company Tannoy, renowned for its commitment to high-fidelity sound reproduction. A distinctive feature of the DC10A is its Dual Concentric driver design, which places the high-frequency driver at the center of the low-frequency driver, ensuring a point source of sound. This innovative design helps maintain phase coherence and delivers a well-integrated soundstage, providing a listening experience that is both immersive and precise.

One of the standout characteristics of the DC10A is its impressive frequency response. The speaker is capable of reproducing audio frequencies from 36 Hz to 40 kHz, making it suitable for a wide variety of music genres and audio applications. This extensive frequency range allows listeners to experience the subtle nuances in both high and low frequencies, ensuring that every instrument and vocal is rendered with clarity and depth.

The cabinet of the DC10A is meticulously crafted from high-quality materials, further enhancing its aesthetic appeal and acoustic performance. The speaker enclosure is designed to minimize resonances that could color the sound. Additionally, the cabinet features a rear-firing port, which helps to enhance low-frequency response and improves overall bass performance.

The DC10A also showcases advanced crossover technology, which divides the audio signal into different frequency ranges to be handled by the respective drivers. This ensures that each driver operates within its optimal range, providing a more accurate and dynamic sound reproduction. The precise engineering of the crossover allows for smooth transitions between the low and high frequencies, contributing to the speaker's overall natural sound signature.

Another significant aspect of the Tannoy DC10A is its power handling capability. The speaker can handle up to 500 watts of peak power, making it ideal for both home listening and professional environments. This ensures that even at high volumes, the speaker maintains sound quality without distortion.

In summary, the Tannoy DC10A is a sophisticated loudspeaker that incorporates innovative technologies and high-quality materials to deliver exceptional audio performance. Its Dual Concentric driver design, broad frequency response, sturdy cabinet construction, and advanced crossover technology make it a standout choice for audiophiles and professionals alike. Whether for music appreciation or critical listening, the DC10A provides a sound experience that is both engaging and accurate, affirming Tannoy's legacy in the world of high-fidelity audio.