USING MICRO-SD CARD
The device supports maximum 32GB micro SD card.
Insert your card into the micro SD slot until it clicks into place. Then it's ready for visiting.
Remove microSD Card
Close all applications or documents which have been opened on the card. Tap 
Settings
Storage
SD card
Unmount this storage device. When it
displayed Mount this device, press the card lightly; it is partially ejected allowing you to pull the card out.
Don't insert and remove the USB flash drive repeatedly in a short time, as this may cause damage to the card.
We recommend using good quality memory cards to avoid incompatibility.
GETTING STARTED
Charge the device
It is not recommended to use the device while charging.
Plug the power adapter into an electrical outlet, and then connect to the device to fully charge the battery before use (A full charge takes about 6 hours when the battery's run out).
Turn the device on
Press the power button and hold for 2 seconds.
Wi-Fi Network Setup
Since many functions require a
1.Tap 
Settings.
2.Slide
The device scans automatically and lists all local
1.Tap the desired network which you want to connect
enter the Network Password if applicable
tap Connect.
2.Tap 
to return to the Desktop screen.
4