Stanley Black & Decker Understanding the Surge Protector Accumulator for Your SD67
Page 13

CHARGING THE ACCUMULATOR

To check or charge the accumulator the following equip- ment is required:

•Accumulator tester (Part Number 02835).

•Charging assembly (P/N 31254—includes a regula- tor, hose and fitting).

•Nitrogen bottle with an 800 psi/56 bar minimum charge.

1.On charge valves containing 5/8 inch hex locking nuts, first loosen the locking nut 1-1/2 turns.

2.Holding the chuck end of the Stanley tester (P/N

02835), turn the gauge fully counterclockwise to ensure the stem inside the chuck is completely re- tracted.

3.Thread the tester onto the charging valve of the tool accumulator (do not advance the gauge end into the chuck end. Turn as a unit). Seat the chuck on the accumulator charging valve and hand tighten only.

4.Advance the valve stem by turning the gauge end clockwise.

5.Connect the charging assembly to the valve on the tester.

6.Adjust the regulator on the nitrogen bottle to 600 psi/42 bar.

NOTE:

It may be necessary to set the regulator at 650– 700 psi/45–48 bar to overcome any pressure drop through the charging system.

7.Open the valve on the charging assembly hose.

When the tester gauge reads 600–700 psi/42–48 bar, close the valve on the charging assembly hose and remove the charging valve.

8.Turn the gauge end of the tester fully counterclock- wise to retract the plunger in the chuck. Remove the tester from the charger valve.

9.On charge valves containing 5/8 inch hex locking nuts, tighten the locking nut.

TESTING THE ACCUMULATOR

1.Follow Steps 1 through 4 under CHARGING THE ACCUMULATOR.

2.Read the pressure on the gauge (pressure should be between 500–600 psi/35–42 bar).

3.If the pressure is low, recharge the tool.

Figure 2. Charging the Accumulator

SD67 User Manual ◄ 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SD67 Page Table of Contents Local Safety Regulations Safety SymbolsSafety Precautions N G E R Tool Stickers & TagsHose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsOperating Procedures PRE-OPERATION ProceduresOperation Cold Weather OperationTool Protection & Care Problem Cause Solution TroubleshootingCharging the Accumulator Testing the AccumulatorSpecial Tools SpecificationsSD67 Parts Illustration Model Descriptions SD67 Parts List

SD67 specifications

The Stanley Black & Decker SD67 is a highly versatile and innovative cordless screwdriver that stands out in the crowded power tool market. Designed for both DIY enthusiasts and professionals, the SD67 combines user-friendly features with advanced technology to deliver efficient and effective performance.

One of the primary features of the SD67 is its powerful motor that provides ample torque to handle a variety of fastening tasks. With a maximum torque rating of 35 in-lbs, this screwdriver can comfortably drive screws into wood, plastic, and even light metal materials, making it suitable for a myriad of applications around the home or job site.

The SD67 incorporates a lightweight and ergonomic design that enhances user comfort and reduces fatigue during extended use. Weighing in at just over 1.5 pounds, it fits seamlessly in hand, allowing for precise control and maneuverability. The soft-grip handle further contributes to a secure hold, ensuring that users maintain stability even in challenging positions.

Equipped with a 2-speed gearbox, the SD67 offers versatility in its operation. Users can easily switch between low speed (0-400 RPM) for tasks requiring greater control and high speed (0-1300 RPM) for rapid driving of screws. This adaptability is crucial for varying application needs, making the screwdriver ideal for both intricate assembly jobs and quick fixes.

An integrated LED work light is another standout feature of the SD67, illuminating dark work areas for improved visibility. This is especially helpful when working in tight spaces or dimly lit environments, allowing users to see clearly without needing to reposition a separate light source.

The tool utilizes a lithium-ion battery that ensures longer runtime and quicker charging. With the capacity to drive approximately 300 screws on a single charge, the SD67 minimizes downtime, allowing users to complete tasks efficiently. Additionally, the battery’s charge status indicator keeps you informed, helping avoid unexpected interruptions during projects.

The SD67's automatic spindle lock allows for manual screwdriving, offering added flexibility to users who need that extra level of control. Furthermore, it comes equipped with a 1/4-inch hex chuck for quick and easy bit changes, accommodating a wide range of attachments and bits.

In summary, the Stanley Black & Decker SD67 exemplifies a perfect blend of performance, comfort, and technology. With its lightweight design, powerful motor, versatile speed settings, and convenient features, it is poised to become a trusted tool in any toolkit. Whether for casual use or professional tasks, the SD67 proves to be a reliable companion for enhancing productivity and achieving results.
Top Page Image Contents