Spectrum Brands 72A-196BAREM Series, 72A-190BQREM Series Alarm Capabilities, Config Cycle Time

Page 16

27-0027-0111Installation and Operation Manual

Operational Control of PDU

CONFIG - CYCLE TIME

The CYCLE TIME parameter sets the amount of time to wait before displaying the next bank measurement. The parameter can be set to FAST, MEDIUM, or SLOW.

CONFIG - NUMBER OF CHANNELS

The unit can be configured to work for 1, 2, or 3 power bank devices. Note that reducing the number of banks to 1 removes the total current monitoring processes.

CONFIG - CONTRAST

The CONTRAST feature allows the user to adjust the contrast of the LCD screen to a desired level.

CONFIG – SOFTWARE REV

Selecting the REV parameter will display the current revision of software loaded into the meter.

CONFIG - METERING CALIBRATIONS

The unit’s onboard voltage and current monitoring devices require a two-step calibration procedure to achieve maximum accuracy. Each power bank has adjustable parameters in the menu system for voltage and current. This calibration is performed at the factory before shipment.

Alarm Capabilities

Each power bank has four major alarm thresholds that can be adjusted.

 

 

There is an upper and lower limit for input voltage. There is also an

 

 

upper and lower limit for distributed current. An alarm is also signaled

 

 

if the current reaches two minor limits: 80% of upper limit, 90% of upper

 

 

limits.

 

 

If a major alarm threshold is surpassed the unit will respond by setting

 

 

the power bank indicator LED to red and setting the audible alarm

 

 

buzzer.

 

 

If a minor alarm threshold is surpassed the unit will toggle the LED

 

 

indicator and audible alarm. The 80% alarm toggles the LED and buzzer

 

 

once per second. The 90% alarm toggles twice per second.

 

 

If an alarm condition exists and the PDU is in monitor mode, the audible

 

 

alarm may be silenced by pressing the Alarm Acknowledge button. If the

 

 

PDU is not in monitor mode and is in the system menu, select the Alarm

 

 

Acknowledge menu item. The audible alarm will remain silenced until

 

 

another alarm threshold is exceeded.

 

 

 

 

SCI P/N: 72A-196BAREM Series

Date: 6/02/2008

16

72A-190BQREM Series

 

 

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Phase Power Monitoring and Distribution Unit Contents Manual Conventions Safety Information Introduction & Safety InformationIntroduction Related Terms Input Output Environmental Physical Global Domestic Technical SpecificationsGlobal Domestic Declaration of Conformity EMCConnections and Installation Operating EnvironmentConnections ElectricalInput and Output Connections LAN Module Communications LAN Module Interface LAN LED Status GuideCrossover Cable DescriptionLAN Module IP Address, DHCP, Auto IP SnmpDevice Discovery Testing the IP Address Configuration LAN Module Configuration Using Telnet ConnectionProcedure PrerequisiteSet PDU and LAN Module to Factory Defaults Exit Configuration Mode LAN Module Reflash InstructionsFront Panel Menu Operational Control of PDUMenu Navigation Peaks MAX, MIN, Reset Alarm Capabilities Config Cycle TimeNetworking Functions IntroductionTelnet CommunicationTelnet Commands List of Commands@BULC B,? Simple Network Management Protocol Snmp SNMP-Managed NetworkAccessing the Snmp Interface Snmp Security Key Snmp SettingsSnmp MAX and MIN Data Snmp v2 Functions Snmp v2 FunctionsNetworking Functions Maintenance & Warranty WarrantyPDU Front Panel

72A-190BQREM Series, 72A-196BAREM Series specifications

Spectrum Brands is renowned for its innovative and reliable products, and the 72A-196BAREM and 72A-190BQREM Series exemplify the company's commitment to quality and performance in the realm of air conditioning solutions. These series are designed for both residential and commercial applications, providing efficient climate control that meets the needs of a diverse range of consumers.

The 72A-196BAREM Series is particularly noted for its energy efficiency. With a high SEER (Seasonal Energy Efficiency Ratio) rating, it operates with minimal energy consumption while maximizing cooling output. This series employs advanced inverter technology, which allows the unit to adjust its speed based on the ambient temperature, ensuring that it operates quietly and efficiently. The smart thermostatic controls offer precise temperature regulation, allowing users to set their desired comfort levels effortlessly.

On the other hand, the 72A-190BQREM Series is distinguished by its compact design and robust performance. It is ideally suited for smaller spaces where installation flexibility is paramount. Its easy-to-install modular components provide users with the ability to configure the system to fit their specific layout and requirements. Additionally, this series features a user-friendly interface, making temperature adjustments simple and hassle-free.

Both series come with advanced filtration systems that help to reduce airborne pollutants, allergens, and odors, promoting a healthier indoor environment. The filters are designed to be easily replaceable, ensuring continued air quality without the need for extensive maintenance.

Moreover, these units are equipped with smart features such as Wi-Fi connectivity and compatibility with home automation systems, allowing users to control their air conditioning remotely via mobile apps. This feature enhances convenience, enabling homeowners to adjust settings before returning home, ensuring a perfectly comfortable environment upon arrival.

In summary, the Spectrum Brands 72A-196BAREM and 72A-190BQREM Series represent the pinnacle of modern air conditioning technology. With a focus on energy efficiency, user-friendliness, and health-conscious design, these series stand out as reliable choices for anyone seeking to optimize their indoor climate, whether at home or in a commercial setting.
Top Page Image Contents