Spectrum Brands 72A-190BQREM Series Networking Functions, Introduction, Telnet, Communication

Page 17

27-0027-0111

Installation and Operation Manual

Networking Functions

Introduction

The PDU LAN Port supports the Telnet and SNMP networking functions,

 

which allow remote monitoring through the network environment. Table

 

1 lists the available Telnet commands. Table 2 lists the content of SNMP

 

functions – Read/Set/Trap in detail. An SNMP Manager PC Tool is need-

 

ed in order to implement the SNMP functions. To implement the Telnet

 

and SNMP functions, the device must be configured properly, such as

 

assigning a valid IP address or subnet mask by using the recommended

 

device discovery tool.

 

Telnet always has the higher priority than SNMP with the timeout value of

 

30 seconds, which can be adjusted later.

Telnet

You can access the PDU by typing “telnet <IP> 10001” and entering the

Communication

username and password (Default username is “root”. Default password is

 

“1234”). The telnet session has a 30 second timeout.

 

 

 

 

 

 

SCI P/N: 72A-196BAREM Series 72A-190BQREM Series

A list of commands is in the following table.

Date: 6/02/2008

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Phase Power Monitoring and Distribution Unit Contents Introduction Related Terms Introduction & Safety InformationManual Conventions Safety Information Global Domestic Technical SpecificationsInput Output Environmental Physical Global Domestic EMC Declaration of ConformityOperating Environment Connections and InstallationInput and Output Connections ElectricalConnections LAN LED Status Guide LAN Module Communications LAN Module InterfaceCrossover Cable DescriptionSnmp LAN Module IP Address, DHCP, Auto IPDevice Discovery LAN Module Configuration Using Telnet Connection Testing the IP Address ConfigurationProcedure PrerequisiteSet PDU and LAN Module to Factory Defaults LAN Module Reflash Instructions Exit Configuration ModeMenu Navigation Operational Control of PDUFront Panel Menu Peaks MAX, MIN, Reset Config Cycle Time Alarm CapabilitiesIntroduction Networking FunctionsTelnet CommunicationList of Commands Telnet Commands@BULC B,? SNMP-Managed Network Simple Network Management Protocol SnmpAccessing the Snmp Interface Snmp MAX and MIN Data Key Snmp SettingsSnmp Security Snmp v2 Functions Snmp v2 FunctionsNetworking Functions Warranty Maintenance & WarrantyPDU Front Panel

72A-190BQREM Series, 72A-196BAREM Series specifications

Spectrum Brands is renowned for its innovative and reliable products, and the 72A-196BAREM and 72A-190BQREM Series exemplify the company's commitment to quality and performance in the realm of air conditioning solutions. These series are designed for both residential and commercial applications, providing efficient climate control that meets the needs of a diverse range of consumers.

The 72A-196BAREM Series is particularly noted for its energy efficiency. With a high SEER (Seasonal Energy Efficiency Ratio) rating, it operates with minimal energy consumption while maximizing cooling output. This series employs advanced inverter technology, which allows the unit to adjust its speed based on the ambient temperature, ensuring that it operates quietly and efficiently. The smart thermostatic controls offer precise temperature regulation, allowing users to set their desired comfort levels effortlessly.

On the other hand, the 72A-190BQREM Series is distinguished by its compact design and robust performance. It is ideally suited for smaller spaces where installation flexibility is paramount. Its easy-to-install modular components provide users with the ability to configure the system to fit their specific layout and requirements. Additionally, this series features a user-friendly interface, making temperature adjustments simple and hassle-free.

Both series come with advanced filtration systems that help to reduce airborne pollutants, allergens, and odors, promoting a healthier indoor environment. The filters are designed to be easily replaceable, ensuring continued air quality without the need for extensive maintenance.

Moreover, these units are equipped with smart features such as Wi-Fi connectivity and compatibility with home automation systems, allowing users to control their air conditioning remotely via mobile apps. This feature enhances convenience, enabling homeowners to adjust settings before returning home, ensuring a perfectly comfortable environment upon arrival.

In summary, the Spectrum Brands 72A-196BAREM and 72A-190BQREM Series represent the pinnacle of modern air conditioning technology. With a focus on energy efficiency, user-friendliness, and health-conscious design, these series stand out as reliable choices for anyone seeking to optimize their indoor climate, whether at home or in a commercial setting.
Top Page Image Contents