SOYO SY-6ZB Motherboard quick start Introduction, Unpacking

Page 3

SY-6ZBQuick Start Guide

1 Introduction

Congratulations on your purchase of the SY-6ZBMotherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard.

This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For further information, please refer to SY-6ZB Motherboard User's Guide and Technical Reference online manual included on the CD-ROM packed with your Motherboard.

Unpacking

* If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.

When unpacking the Motherboard, check for the following items:

uThe SY-6ZB 82440 ZX AGP/PCI Motherboard

u This Quick Start Guide

u The Installation CD-ROM

u The CPU Retention Set

u One IDE Device Flat Cable

u One Floppy Disk Drive Flat Cable

Introduction

uOne dual 25-pin parallel with 25-pin flat cable and 9-pin serial with 9-pin flat cable external connector

uOne dual 6-pin PS/2 mouse connector with 6-pin flat cable and 9-pin serial connector with 9-pin flat cable

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Quick Start Guide SY-6ZB Motherboard Unpacking IntroductionSY-6ZB Motherboard Layout Preparations InstallationInstall the Motherboard Make Connections to the Motherboard Connectors and Plug-insSet SW1 for power up FSB clock and AGP bus clock Configure MemoryEnable/Disable Power-On by Keyboard JP50 Set the CPU FrequencyClear Cmos Data JP5 SY-6ZBQuick Start Guide Select Chipset Features Setup Quick Bios SetupSelect Load Setup Default Select Standard Cmos SetupSoyo CD Insert the Soyo CD into the CD-ROM driveRead Soyo 6ZB Manual Soyo CD Manuals Install DriversDriver Installation Menu Intel Southbridge Drivers Enter the Soyo CD Page 6ZB Serial
Related manuals
Manual 20 pages 5.52 Kb Manual 69 pages 55.45 Kb
Top Page Image Contents