The SOYO CD
Please note that if the Start Up program was unable to determine which SOYO Motherboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your Motherboard model name and click OK.
SOYO CD Manuals
Please select your manual in the box below and click OK.
686 boards: | 586 boards: |
6VBA 133 
OK 
Back
(Manual Selection Menu)
The user's manual files included on the SOYO CD can be read in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system.
Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Follow the instructions on your screen during installation, then once the installation is completed, restart your system and
Step 3. Install Drivers
The following describes the best way of installing Windows 95 or Windows 98 on your 6VBA
133 Motherboard:
ØThe following BIOS default settings should not be changed:
1.The‘OnChip USB Controller’item under ‘Chipset features Setup’is set to enabled.
2.The‘USB Assigned IRQ’item under ‘PnP/PCI Configuration is set to enabled.
You MUST have these two items enabled for Windows 95/98 to run properly on your system.
ØInstall Windows 95/98
ØIf you installed Windows 95 you will now need to upgrade your USB driver by running the following program on your Windows CD:
Win95/OSR2/Usbsupp/USBsupp.exe
16