SOYO SY-5EMA+ quick start Attach Connectors, Cmos Clear

SY-5EMA+Quick Start Guide

Step 5. Attach Connectors

This section tells how to connect internal peripherals and power supply to the Mainboard.

Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on how to connect internal and external peripherals to your new SY-5EMA+ Super 7 ™ Mainboard, please refer to SY-5EMA+ Mainboard User's Guide and Technical Reference online manual on CD-ROM.

Connectors and Plug-ins

Installation	Wake-On-LAN Jumper: JP44				CPU Cooling Fan : CPUFAN
					Chassis Cooling Fan : CHAFAN
	Connect the WOL cable from your LAN card to				Connect you cooling Fan cable to this connector
	JP44.
	TB LED	SPK		RESET		IDE LED		KB-LOCK
	Connect your	Connect the		Connect the reset		Connect the IDE		Connect the
	Turbo LED to this	speaker cable to		button to this		device LED to this		Power LED and
	jumper	this jumper		jumper		jumper		the KB Lock
								switch to this
								jumper
	IrDA (Infrared Device		ATX Power On/Off: PWRBT				ATX Power Cable : ATX PW
	Connector): IR
	Connect your IrDA device to this		Connect your power switch to				Attach the ATX Power cable to
	connector		this jumper (momentary switch				this connector
			type)

CMOS Clear

Clear the CMOS memory by shorting pin 2-3 on jumper JP5, and then by shorting pin 1-2 to retain new settings. This jumper can be easily identified by its white colored cap.

CMOS Clearing	Clear CMOS Data		Retain CMOS Data (Default)
	short pin 2-3 to	1	Short pin 1-2 to	1
JP5 Setting	clear the CMOS	2	retain new settings	2
		3		3

Note: You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation.

10