SOYO SY-5EMA+ quick start Quick Bios Setup, Select Load Setup Default, Select Standard Cmos Setup

Page 11

SY-5EMA+Quick Start Guide

3 Quick BIOS Setup

After the hardware installation is complete, turn the power switch on, then press the <DEL> key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete the quick BIOS setup.

Step 1. Select [LOAD SETUP DEFAULT]

Select the “LOAD SETUP DEFAULT”menu and type “Y”at the prompt to load the BIOS optimal setup.

Step 2. Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.

Step 3. Select [SAVE & EXIT SETUP]

Press <Enter> to save the new configuration to the CMOS memory, and continue the boot sequence.

Quick BIOS

Setup

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Quick Start Guide SY-5EMA+ Super7 Mainboard Unpacking IntroductionKey Features Preparations InstallationInstall the CPU Install the MainboardJP1 JP2 Set JP30 ,JP1 and JP2 for CPU VoltageJP8 JP9 Set SW1 for CPU FrequencyClock Configure MemoryPCI Clock JP10 Cmos Clear Attach ConnectorsSelect Save & Exit Setup Quick Bios SetupSelect Load Setup Default Select Standard Cmos SetupRead Soyo model name Manual Soyo CDInsert the Soyo CD into the CD-ROM drive Back Installation procedure for Windows 95/98Please select your manual In the box below and click OK Driver Installation Menu Enter the Soyo CD 5EMA+ Serial
Top Page Image Contents