SOYO SY-5EMA quick start Connectors and Plug-ins, Attach Connectors

SY-5EMA+ V1.0 Quick Start Guide

Step 4. Attach Connectors

This section tells how to connect internal peripherals and power supply to the Motherboard.

Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on how to connect internal and external peripherals to your new SY-5EMA+ V1.0 Super 7 ™ Motherboard, please refer to SY-5EMA+ V1.0 Motherboard User's Guide and Technical Reference online manual on CD-ROM.

Connectors and Plug-ins

	IrDA (Infrared Device Header): IR1					Wake-On-LAN Header: JP44
Pin1	Pin2	Pin3		Pin4	Pin5	Pin1	Pin2		Pin3
VCC	None	IRRX	GND		IRTX	5VSB	GND		MP-Wakeup
CPU Cooling Fan: CPUFAN				Chassis Cooling Fan: CHAFAN				USB

Pin1	Pin2		Pin3	Pin1		Pin2		Pin3	Connect your USB devices
GND	12V		SENSOR	GND		12V	SENSOR to this header.
Power LED Key Lock			Speaker			Power LED			Keylock
+	_		+	_	Pin1	Pin2		Pin3	Pin1	Pin2
					5V		NC	GND	Control Pin	GND
			+ _ +	_				Speaker
					Pin1		Pin2		Pin3	Pin4
Reset	PWRBT	Turbo LED HDD LED			5V			NC	NC	Speaker out

HDD LED		TB LED		PWRBT		RESET
Pin1	Pin2	Pin1	Pin2	Pin1	Pin2	Pin1	Pin2
LED Anode	LED Cathode	LED Anode	LED Cathode	Power On/Off	GND	Power Good	GND

ATX Power On/Off: PWRBT

Connect your power switch to this header (momentary switch type).

To turn off the system, please press this switch and hold down for longer than 4 seconds.

ATX Power Supply: ATX PW

Attach the ATX Power cable to this connector. If you use ATX power supply.

When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply can take at least 720mA load on the 5V Standby lead (5VSB) to meet the standard ATX specifications.

Installation

13