Sound Performance Lab Model 2601 manual 4FUVQ
, 4FUVQ


Live			Setup Examples
4FUVQ 
1PXFS *OQVU	4QFBLFS 5ISV	-JOF 0VUQVU 	-JOF 0VUQVU 
4QFBLFS 0VU	 E#
		'0)	.POJUPS
		.JYFS	.JYFS
		1 "	.POJUPSJOH

Setup 3

If an on-stage guitarist wishes to have his cabinet sound, the signal should be routed to his box via the Transducer Speaker Thru. In this case the amp signal power is reduced by 8 dB enroute to the box; here saturation (that is, power amp distortion) begins to occur at moderate listening levels.

The two separate Transducer Line Outputs may be used simultaneously to feed both an FOH mixer and monitor mixer.

4FUVQ 
1PXFS *OQVU		-JOF 0VUQVU 	-JOF 0VUQVU 
4QLS 0VU	4QLS 0VU
		'0)	.POJUPS
		.JYFS	.JYFS
		1 "	.POJUPSJOH

Setup 4

If the guitarist does not need the 8 dB Speaker Thru signal reduction, he may connect both the guitar box and Transducer simultaneously with the guitar amp loudspeaker outputs (assuming this is an amp option).

IMPORTANT ADVICE: In such cases the guitar amp impedance must be reduced by half. For

example: In connecting to the Transducer (8 ohms) and guitar box rated at 8 ohms, the guitar amp must be set up at 4 ohms. The two separate Transducer Line Outputs may be used to

feed both an FOH mixer and monitor mixer simultaneously.

Transducer 17