Manual Transducer, Model 2601
Version 1.1 – 5/2007
Designer: Ralf Reichen, Jens Gronwald
This user's guide contains a description of the product. It in no way represents a guarantee of particular characteristics or results of use. The information in this document has been care- fully compiled and verified and, unless otherwise stated or agreed upon, correctly describes the product at the time of packaging with this document.
Sound Performance Lab (SPL) continuously strives to improve its products and reserves the right to modify the product described in this manual at any time without prior notice. This document is the property of SPL and may not be copied or reproduced in any manner, in part or fully, without prior authorization by SPL.
SPL electronics GmbH
Sohlweg 55
41372 Niederkruechten
Germany
Tel. +49 (0)2163 983 40
Fax +49 (0)2163 983 420
Email: info@soundperformancelab.com
www.soundperformancelab.com
CE Declaration of Conformity
Manufacturer: SPL electronics GmbH
Type of Equipment: Audio Signal Processor
Product: Transducer, Model 2601
Compliance Engineer: Wolfgang Neumann
Test Basis:
EN60065:2002, EN55013:2001, EN55020:2002,
We herewith declare, that the construction of the Transducer, Model 2601, is in compliance with the standards and regulations mentioned above.
Notes on environmental protection
At the end of its operating life, this product must not be disposed of with regular 
household waste but must be returned to a collection point for the recycling of electrical and electronic equipment. The “wheelie bin“ symbol on the product, 
user‘s manual and packaging indicates that. The materials can be 
other forms of recycling of old products, you are making an important contribution to the protection of our environment. Your local administrative office can advise you of the respon- sible waste disposal point.
WEEE Registration: 973 349 88
©2007 SPL electronics GmbH. All rights reserved. Names of other companies and their prod- ucts are trademarks of their respective owners.
2 | Transducer |