Hardware Installation |
|
Repeat this operation until you get the following screen.
3. The BIOS Setup screen appears:
CMOS Setup Utility – Copyright ( C ) 1984-2002 Award Software
SOYO COMBO Feature | PC Health Status |
Standard CMOS Features | Load Fail - Safe Defaults |
Advanced BIOS Features | Load Optimized Defaults |
Advanced Chipset Features | Set Supervisor Password |
Integrated Peripherals | Set User Password |
Power Management Setup | Save & Exit Setup |
PnP/PCI Configurations | Exit Without Saving |
|
|
Esc : Quit | : Select Item |
F10 : Save & Exit Setup |
|
Change CPU’s Clock & Voltage
2-3 QUICK BIOS SETUP
This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO FEATURE]. The [SOYO COMBO FEATURE] combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on, then press the <DEL> key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be shown on the screen. Then, follow these steps to configure the CPU settings.
Step1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step2. Select [LOAD OPTIMIZED DEFAULTS]
Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the
33