SOYO SY-P4I845PE user manual Install driver during Windows 2000 installation

Page 92

HighPoint hpt371 Driver Installation

SY-P4I845PE

NT4.0.

Install driver during Windows 2000 installation

1.Go to “D:\raid\hpt371\121\” directory, (assuming that your CD-ROM is drive d) copy all the files and directories to a floppy disk.

2.If Windows 2000 is installed from the floppy drive, please let the installing program run automatically. If Windows

2000 is installed from the CD-ROM drive, please press the F6 key when the message Press F6 if you need to install third party SCSI or RAID driver appears.

3.Press the S key to specify additional devices when the Windows 2000 Setup window appears.

4.Insert the floppy disk with the driver, then press Enter to continue.

5.The system will ask whether to install the driver under WinNT or under Windows 2000, please select to install the driver under Windows 2000.

6.In the next screen (Device Type), please select Other and press Enter to continue.

7.The next screen will list the devices to be installed, in which HPT371 UDMA/ATA133 Controller item should be included (If users want to install other devices, please do so at this time. If all devices have been successfully installed, please go to next.)

Install driver during Windows XP installation

1.Go to “D:\raid\\hpt371\121\” directory, (assuming that your CD-ROM is drive d) copy all the files and directories to a floppy disk.

2.Booting from CD-ROM, when the Windows XP Setup’s blue screen appears and prompts the user to press the F6 key to install third party SCSI or RAID driver, please press

88

Image 92
Contents Motherboard P4I845PE Serial Edition OctoberVersion Table of Contents Chapter SERIAL-ATA Driver Installation Introduction Unpacking the MotherboardKEY Features Expansion slotsIDE RAID Function Enhanced IOFail Safe Electrostatic Discharge Precautions Handling the MotherboardSY-P4I845PE Motherboard Layout Back PanelSY-P4I845PE Motherboard Components SY-P4I845PE Installation Guide PreparationsBegin the Installation SY-P4I845PE CPU Fan Installation Install Memory Module Installation of Expansion Cards Connect cables, case wire, and power supply IDE Device Installation HDD, CD-ROMHardware Installation Floppy Drive Installation FDCPower LED & KeyLock Front Panel ConnectionsAcpi LED ResetSpeaker ATX Power On/Off Switch IDE LEDBack Panel Connections Onboard Serial Ports COM1/COM2 Parallel Port PRTPS/2 Keyboard PS/2 MouseUniversal Serial Bus USB200, USB201 Other Connections Standard Infrared SirconCooling Fan Installation CPU Cooling Fan CPUFAN1, CPUFAN2 Chassis Cooling Fan CHAFAN1, CHAFAN2 CDIN1CD Line-in Pin Assigment Smart Card Reader CD Line-in CDIN1MIC & LED Connector J30 AUX-IN AUXIN1ATX Power ATX12V Power SupplyATX Power Pay special care to the directionalityCmos Clear JP5 Audio Speakers connectionsAudio Upgrade Power OnSelect Load Optimized Defaults Quick Bios SetupSelect Standard Cmos Setup Select Soyo Combo Feature Select Save & Exit SetupSelecting items Modifying selected itemsFunction Command Description EnterSave and Exit Setup Exit Without SavingSY-P4I845PE Soyo Combo SetupSoyo Combo Feature Setting Description System PerformanceSetting Description Auto Detect Setting Description CPU Vcore SelectPCI Clk Spread SpectrumQuick Power On Self Test Advanced Dram ControlOnboard Settings System Boot Control SettingsStandard Cmos Setup Date Display Setting Please NoteDate & Time TimeFloppy Drives Hard Disks Type & ModeIDE HDD Halt On Setting Description VideoOthers Optional Advanced Bios Features VirusSetting Description Virus Warning Virus WarningCache Memory Options CPU Hyper-Threading functionBios Setup Utility Boot Up Floppy SeekBoot Up NumLock Status Typematic SettingsTypematic Settings Description Typematic Rate Typematic DelaySecurity Option Other Control OptionsHDD Small LogoEPA ShowEPA Logo SelectAdvanced Chipset Features Features ChipsetAGP Aperture Size MBIntegrated Peripherals PCI IDEIDE Controls Setting Description On-Chip PCI IDE IDE Device ControlsPrimary IDEIDE HDD Block Mode Keyboard ControlsFDC Controls DMA Onboard Serial PortsOnboard Parallel Ports Setting Description Pwron After PWR-FailGame Port Address Midi Port AddressPower Management Setup DpmsPower Management Controls Power Setting Description Management Controls HDD Power Power On byAlarm DownLPT Port Reload Global Timer EventsPower Down Setting Description Resume Events PNP/PCI Configuration Setup 1 PNP/PCI Configuration Controls PNP/PCI Configuration Setup VGA/USBIRQ LPT1PC Health Status CHAFAN1 Speed CPUFAN1 Speed CPU Device Setting Description MonitoringCPU Device Monitoring Load FAIL-SAFE Defaults Load Fail Safe Defaults Y/N? YLoad Optimized Defaults Load Optimized Defaults Y/N? YSupervisor Password Enter Password Password DisabledConfirm Password User PasswordBoot Menu SOYO-CD will Auto Run only in Windows Base Operating System Soyo CD Start Up Program MenuSY-P4I845PE Install Drivers and Utilities HighPoint371 Utility for Win 9x/ME/2000/NT/XP Check the Latest Releases SY-P4I845PE SY-P4I845PE Drivers directory list in the CD driver Davicom Onboard LAN Driver Installation Installing the Davicom Onboard LAN Drivers under Windows MEInstalling the Davicom Onboard LAN Drivers under Windows NT Installing the Davicom Onboard LAN Drivers under WindowsInstalling the Davicom Onboard LAN Drivers under Windows USB 2.0 Driver Installation 9x/ME Manual Installation Windows NTWindows Windows XPDriver Install During OS Installation Install driver during Windows 2000 installation UDMA/ATA133 Controller for Windows XP to continue SERIAL-ATA Driver Installation