SOYO SY-K7VTA PRO quick start How to Clear Cmos DataJP5, Clear Cmos Data Retain Cmos Data

SY-K7VTA PRO Quick Start Guide

How to Clear CMOS Data(JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory.

1.Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be easily identified by its white colored cap.

2.Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

CMOS Clearing	Clear CMOS Data			Retain CMOS Data
	Short pin 2-3 for			Short pin 1-2 to
JP5 Setting	at least 5 seconds to			retain new settings
	clear the CMOS
	1	2	3	1	2	3

Note: You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation.

13

Hardware Installation