SOYO SY-K7VTA PRO quick start Quick Trouble shoot tips, Boot-up issue

Page 19

SY-K7VTA PRO Quick Start Guide

Quick Trouble shoot tips

What to check when you encounter :

Boot-up issue

The system do not power-up, no beeping sound heard and the CPU fan does not turn on.

1.check if the power cord is plug to the power source

2.check if the power is connected to the M/B

3.check if the case power button is connected to the M/B power button connector (see connectors and plug-ins in the Quick start guide for more info)

4.make sure the power supply is not defective. Change the power supply.

5.remove the M/B from the case and test the system. The M/B might be shorted to the case.

6.if everything else fail. The M/B is defective

The system power-up, no video, no beeping sound heard, but the CPU fan is turning.

1.clear CMOS battery. (JP5 connector, see Quick start guide for more info on how to clear the CMOS)

2.check all the jumper settings on the M/B. (if the M/B have any)

3.check if the CPU is ok by using another CPU (check the Quick start guide for CPU supported on this M/B)

4.check if the power supply is ok

5.make sure the CPU fan is connected to CPUFAN1 connector (for K7 and P4 M/B only)

6.remove the M/B from the case and test the system. The M/B might be shorted to the case.

7.M/B is defective.

The system power-up, no video, CPU fan is spinning and beeping heard.

1.clear CMOS battery. (JP5 connector, see Quick start guide for more info on how to clear the CMOS)

2.check the memory module and the VGA card if inserted properly on the M/B

3.if yes, change the memory module, it might be defective. Make sure the memory specification is supported by the M/B. (for more info on this, check our FAQ website)

4.change the VGA card

19

Image 19
Contents Quick Start Guide K7VTA PRO Serial Version 1.4 Edition February SY-K7VTA PRO MotherboardIntroduction SY-K7VTA PRO Motherboard Layout Key Features Installation 266MHz Front Side Bus DDR transfer on Athlon CPU Installation200MHz FSB DDR transfer on Athlon 200MHz FSB DDR transfer on DuronFOC Fan-Off Control CPU FSB Setting FJ1,FJ2 Set CPU jumper CPU Ratio Adjustment Setting RJ1FJ1 FJ2 USB34 USB4 ATX Power On/Off PwrbtATX Power Supply ATX PW Wake-On-LAN Header J10Memory Module Size MB Configure MemoryWhat is Voice Doctor Number of Memory ModulesClear Cmos Data Retain Cmos Data How to Clear Cmos DataJP5Quick Bios Setup Soyo CD Start Up Program Menu Soyo CDSoyo CD  VxD Driver Driver Installation MenuVIA 4in1 Driver Package for Win 9x/ME/NT/2K  Bus Master PCI IDE DriverK7VTAPRO VIA hardwareR monitor for Win 95/98 Check the Latest ReleasesQuick Trouble shoot tips Boot-up issueSystem turns on for some seconds then shutdown by itself Stability issueWhere can I find the Bios revision of my mainboard? Bios issueVGA issue CPU issueAudio issue For updated FAQs, please check Hard disk issueTaiwan How to contact usPage Edition February Version
Related manuals
Manual 98 pages 15.91 Kb Manual 98 pages 29.51 Kb