SOYO SY-7VCA2 user manual Resume by Alarm, Primary Intr, IRQs Activity, Monitoring, Press Enter

BIOS Setup Utility		SY-7VCA2
Wake Up	Setting	Description	Note
Events
HDD & FDD
	OFF	When On of HDD & FDD, any	Default
	ON	activity from one of the listed
		system peripheral devices wakes up
		the system.
PCI Master	OFF	When On of PCI Master, any
	ON	activity from one of the listed	Default
		system peripheral devices wakes up
		the system
PowerOn by	Disabled	If enabled any PCI interrupt will
PCI Card	Enabled	wake up the system.	Default
Modem Ring
	Disabled	An input signal on the serial Ring
Resume	Enabled	Indicator (RI) line (in other words,	Default
		an incoming call on the modem)
		awakens the system from a soft off
		state.

Resume by Alarm

Disabled	The system ignores the alarm.	Default
Enabled	Set alarm to power on the system by
	the date (1-31) or time (hh:mm:ss).
	If the date is set to [0], the system

will self-power on by alarm everyday at the set time.

Primary INTR
	ON	When set to On, any event occurring	Default
	OFF	at will awaken a system which has
		been powered down.
IRQs Activity	Primary	IRQ3(COM2), IRQ4(COM1),
Monitoring		IRQ5(LPT2), IRQ6(Floppy Disk),
(Press Enter)		IRQ7(LPT1), IRQ12(PS/2 mouse),
		IRQ13(Coprocessor),
		IRQ14(HardDsik)
	Secondary	IRQ9(IRQ2 Redir),
		IRQ10( Reserved),
		IRQ11(Reserved)
	Disabled	IRQ8 (RTC Alarm), IRQ15
		(Reserved)

80