Socket Mobile IB810 user manual J23 PS/2 Keyboard and Mouse Connector, J26 VGA CRT Connector

INSTALLATIONS

J23: PS/2 Keyboard and Mouse Connector

J23 uses a Y-cable with dual D-connectors for a PS/2 keyboard and a PS/2 mouse.

	Pin #	Signal Name
	1	Mouse data
	2	Keyboard data
	3	Ground
	4	Vcc
J12	5	Mouse Clock
	6	Keyboard Clock

J25, J27: Primary and Secondary RJ45 Connector

J25 and J27 are the primary RJ-45 and secondary RJ-45 connectors respectively. The J27 secondary RJ-45 connector is used in conjunction with a secondary Ethernet provided through a MicroPCI Ethernet card. The figure below shows the pin out assignments of the connector and its corresponding input jack.

Active LED

Link LED

RJ-45

TD+(pin#1)

TD-(pin#2)

RD+(pin#3)

RD-(pin#6)

J26: VGA CRT Connector

The pin assignments of the J26 VGA CRT connector are as follows:

	Signal Name	Pin	Pin	Signal Name
	Red	1	2	Green
	Blue	3	4	N.C.
	GND	5	6	GND
J26	GND	7	8	GND
	N.C.	9	10	GND
	N.C.	11	12	N.C.
	HSYNC	13	14	VSYNC
	NC	15

IB810 User’s Manual 27