Application, Mounting, Connections | Sinar 552.36.095 instruction

Sinarback eMotion / CMV Interface

552.36.095

Figure 1: Sinarback eMotion/CMV Interface

Figure 2: Mounting and connecting the Sinarback eMotion/CMV Interface

Application

With the Sinarback eMotion/CMV Inter- face 552.36.095 (fig. 1) any Sinarback eMotion can be operated on a Sinar p3

or Sinar f3 SL with sliding adapter and Sinaron Digital CMV lenses.

Mounting

The Sinarback eMotion/CMV Interface is mounted on the rear side of a Sinar

Sliding Adapter 100 (see fig. 2) of any Sinar p3 or Sinar f3 SL view camera by means of a Velcro strip that is part of the delivery.

Connections

•The two cables Trigger and

Winder are plugged in the Sinarback eMotion.

•To power the Sinaron Digital CMV lenses a Sinar 12 volt power supply

(e.g. 523.11.053) is required and is

plugged in the interface's DC IN 12 V socket . Furthermore, the cable of

the sliding adapter must be plugged in the interface's socket .

•To enable the CMV lenses to open and close in dependence of the position

of the sliding adapter (viewer or cap- ture) an additional Sinarback Auto Cable Release 551.43.059 is required. Usually, this cable is included with every "Sinar Sliding Adapter 100 HB-V" (except with the "Basic" versions). How- ever, it is also available separately. This cable is screwed in the appropriate thread on the lower side of the sliding

adapter; its "telephone" plug is plugged in the interface's CTRL socket .

•The flash synch cable is connected to the X-contact of the CMV lens.

Operation

•To operate the Sinarback eMotion/

CMV Interface, the Sinarback eMotion must be updated to firmware ver- sion 4.42 or higher, and Sinar CaptureShop™ 5.4.2 or higher must be used.

•When the Sliding Adapter is moved to the Viewer position, the shutter of the Sinaron Digital CMV lens automatically opens to the preset working aperture.

When the Sliding Adapter is moved to the Capture position, the shutter of the CMV lens is being closed.

•Exposure times from 1/60 to 30 seconds are to be set in the Settings Menu on the Sinarback eMotion.

•An Image is captured either remote controlled from the Sinar Capture-

Shop™ or at the camera by means of the Auto Cable Release 551.43.059 .

Deutsch siehe Rückseite

_________________________________________________________________________________________________________________________

SINAR AG

CH-8245 Feuerthalen/Switzerland

Telephone	+41 / 52 647 07 07
Fax	+41 / 52 647 06 06
E-mail	marketing@sinarcameras.com
Website	www.sinarcameras.com

_inCaInterfaceEmotionCMV_0210416V2.doc

 