4 Connecting to a Windows NT Server 4.0
Windows NT Workstation Version 4.0
Windows NT
Workstation
Version 4.0
4 Connecting to a Windows NT Server 4.0
Requirements
•HP Vectra with Microsoft Windows NT Workstation 4.0 installed.
•IBM AUTO LANStreamer PCI Drivers diskettes Ver. 1.04
• | Driver Name for Vectra VL8 and VL7: OEMSETUP.inf | Size: 67KB Date: |
| 10/18/96 |
|
• | Driver Name for Vectra VE7/VE8: Streamer.386 | Size: 85KB Date: |
| 8/19/96 |
|
•Microsoft Windows NT Workstation 4.0 and Service Pack Media.
•Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
| Vectra VL8 | Vectra VL7 | Vectra VE7/VE8 |
|
|
|
|
I/O Base Address | F800h | C800 | |
|
|
|
|
Interrupt Request | 11 | 11(10) | 10(11) |
Level |
|
|
|
|
|
|
|
Procedure
1With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot.
2Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
3After the machine boots, verify that the adapter finished testing and that the adapter is “OK.”
4Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5After windows loads, log into NT workstation with administrator privileges.
(If you do not have the required information, contact your network administrator)