4Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51
Windows NT
Workstation
Version 3.51
Requirements
•HP Vectra with Microsoft Windows NT Workstation 3.51 installed.
•IBM AUTO LANStreamer PCI Drivers diskettes Ver. 1.04
•DriverName:OEMSETUP.infSize:67KBDate:10/18/96
•Microsoft Windows NT Workstation 3.51 and Service Pack Media.
•Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
| Vectra VL8 | Vectra VL7 | Vectra VE7/VE8 |
|
|
|
|
I/O Base Address | F800h | C800h | DC00h |
|
|
|
|
Interrupt Request | 11 | 11 | 10(11) |
Level |
|
|
|
|
|
|
|
Procedure
1With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI slot.
2Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI Diagnostic Disk) and power on the machine.
3After the machine boots, verify that the adapter finished testing and that the adapter is “OK.”
4Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5After windows loads, open the “MAIN” program group , and
6Select the “Network” icon in the “Control Panel” program group.
7Click on “YES” in the “Network Settings“ dialog box, and NT Networking will be installed on your computer.
8Insert the Windows NT Workstation CD.
9In the “Windows NT Setup” enter the path to your NT files, and click on the “Continue” button.
(If you have an HP preloaded HDD, set path to “C:\I386”)