SIIG UM022_02 user manual Addressing, Buttonledid

4. Addressing

4.1.Addressing of keyboardCUE-S (serial number up to CS0174.0128) and keyboardCUE-S /w

The ADDRESS of the keyboardCUE-S and keyboardCUE-S /w can be set in the range 0 to 9 by the firmware. Standard keyboards have address 0, addresses 1 to 9 are delivered on a special order.

The BUTTON_ID transmitted by a panel and BUTTON_LED_ID (tabletop model keyboardCUE-S only) are numbers used in the programming for button and bargraph identification. Both values depend on a button position and it depends on a keypad ADDRESS too. Both values are calculated according formulas

BUTTON_ ID	= Offset + Button Code
BUTTON_LED_ID	= Offset + Button Code
Offset	= 32 * ADDRESS

The lowest BUTTON_ID is generated by a button in the upper left corner the highest BUTTON_ID is generated by a button in the lower right corner - see example for ADDRESS = 0 on the picture below.

Button LED Code = 1 Button Code = 1 Button Code = 1

1 2

3 4

5 6

7 8

1 2

3 4

5 6

7 8

In the table below there is Button ID range for each address.

ADDRESS	BUTTON_ID range = BUTTON_LED_ID range
0	1	8
1	33	40
2	65	72
3	97	104
4	129	136
5	161	168
6	193	200
7	225	232
8	257	264
9	289	296

User Manual Small Keyboards

www.cuesystem.com

Page 7 of 18