RAID Group Menu Commands
Create RAID Group
This command displays a dialog box to let user create a RAID group, the user needs to specify the following parameters:
RAID Group Label: Provides a name for the RAID group.
RAID Group: Select a group ID from the available ID list. Configuration:
Striped: for RAID 0; Mirrored: for RAID 1
Capacity: Select from a list of RAID group sizes. Selecting MAX will create the largest RAID set possible with the drives selected.
Chunk Size: Select one size from the available list. This setting is for RAID 0 (Stripe) set only.
Rebuild Priority: Select from the available list. RAID 0 and virtual disk do not require this. 10 is the highest level of rebuild priority which means that rebuild times will be faster but will take more CPU resources to rebuild.
Devices: Select RAID member devices from the available device segment list.
Rebuild RAID Group
This command displays a dialog box to let the user choose a replacement segment to rebuild a
Delete RAID Group
This command displays a dialog box to let the user choose RAID groups to delete.
13