Remote Interface Reference
•Command Summary, starting on page 105
•Simplified Programming Overview, star ti ng on page 112
•The MEASure? and CONFigure Commands, starting on page 117
•Measurement Configuration Comm ands, starting on page 121
•Math Operation Commands, starting on page 124
•Triggering, starting on page 127
•Triggering Commands, starting on page 130
•System-Related Commands, starting on page 132
•The SCPI Status Model, starting on page 134
•Status Reporting Commands, starting on page 144
•Calibration Commands, on page 146
•RS-232 Interface Configuration, starting on page 148
•RS-232 Interface Commands, on page 153
•An Introduction to the SCPI Language, starting on page 154
•Output Data Formats, on page 159
•Using Device Clear to Halt Measurements, on page 160
•TALK ONLY for Printers, on page 160
•To Set the GPIB Address, on page 161
•To Select the Remote Interface, on page 162
•To Set the Baud Rate, on page 163
•To Set the Parity, on page 164
•To Select the Programming Language, on page 165
•Alternate Programming Language Compatibility, starting on page 166
•SCPI Compliance Information, on page 168
•IEEE-488 Compliance Information, on page 169
If you are a first-time user of the SCPI language, you may want to refer to these sections
to become familiar with the language before attempting to program the multi meter.
>
>
104