Agilent Technologies 34401A manual Power-On and Reset State

Chapter 3 Features and Functions

Power-On and Reset State

For your convenience, this table is duplicated on the rear cover of this manual and on the Quick Reference Card.

Power-On and Reset State

The parameters marked with a bullet ( • ) are stored in non-volatilememory. The factory settings are shown.

Measurement	Configuration	Power-On/Reset State
AC Filter		20	Hz (medium filter)
Autozero		On
• Continuity Threshold		• 10 Ω
Function		DC volts
Input Resistance		10	MΩ (fixed for all dcv ranges)
Integration Time		10	PLCs
Range		Autorange
Resolution		51⁄2 digits, slow mode

Math Operations	Power-On/Reset State
Math State, Function	Off, Null
Math Registers	All registers are cleared
• dBm Reference Resistance	• 600 Ω

Triggering Operations	Power-On/Reset State
Reading Hold Threshold	0.10% of range
Samples Per Trigger	1 sample
Trigger Delay	Automatic Delay
Trigger Source	Auto Trigger

System-Related Operations		Power-On/Reset State
•	Beeper Mode	•	On
•	Comma Separators	•	On
	Display Mode		On
	Reading Memory		Off (cleared)

3

Input/Output Configuration

•Baud Rate

•GPIB Address

•Interface

•Language

•Parity

Calibration

•Calibration State

Power-On/Reset State

•9600 baud

•22

•GPIB (IEEE-488)

•SCPI

•Even (7 data bits)

Power-On/Reset State

•Secured

101