Agilent Technologies 34401A Calibration Errors 703, 704, 705, 706, 707, 708, 709, 710, 720, 721

Chapter 5 Error Messages

Calibration Errors

703	Invalid secure code
	An invalid calibration security code was received when attempting to
	unsecure or secure the multimeter. You must use the same security code
	to unsecure the multimeter as was used to secure it, and vice versa. The
	security code may contain up to 12 alphanumeric characters. The first
	character must be a letter.

704	Secure code too long
	A security code was received which contained more than 12 characters.
705	Cal aborted
	A calibration in progress is aborted when you press any front-panel key,
	send a device clear, or change the local/remote state of the multimeter.
706	Cal value out of range
	The specified calibration value (CALibration:VALue) is invalid for the
	present function and range.
707	Cal signal measurement out of range
	The specified calibration value (CALibration:VALue) does not match
	the signal applied to the multimeter.
708	Cal signal frequency out of range
	The input signal frequency for an ac calibration does not match the	5
	required input frequency for calibration.
709	No cal for this function or range
	You cannot perform calibrations for ac current, period, continuity, diode,
	ratio, or on the 100 MΩ range.
710	Full scale correction out of range
720	Cal DCV offset out of range
721	Cal DCI offset out of range
722	Cal RES offset out of range
723	Cal FRES offset out of range
724	Extended resistance self cal failed

181