To Use Reading Memory The multimeter can store up to 512 readings in internal memory.
The following steps demonstrate how to store readings and retrieve them.
1 Select the function.
Select any measurement function. You can also select Null , Mi n–Max,
dB, dBm, or limit test. You can change the function at any time during
reading memory.
2 Select the single trigger mode.
Notice that the Trig annunciator turns on. When reading memory is
enabled, readings are stored when you trigger the multim eter .
For this example, single tri ggering is used to store readings . You can also
use auto triggering or reading ho ld.
3 Turn on the menu.
A: MEAS MENU
4 Move across to the SYS MENU choice on this level.
D: SYS MENU
5 Move down to a level to the RDGS STORE command.
1: RDGS STORE
Single
> > >
∨
Shift <
On/Off
Chapter 2 Front-Panel Menu Operation
To Use Reading Memory
46