MESSAGES DISPLAYED DURING MENU USE
TOP OF MENU You pressed while on the “ menus” level; this is the top level of
the menu and you cannot go any higher.
To turn off the menu, press (Menu On/Off). To move across the choices
on a level, press or . To move down a level, press .
MENUS You are on the “menus” level. Press or to view the choices.
COMMANDS You are on the “commands” level. Press or to view the
command choices within the selected menu group.
PARAMETER You are on the “parameter” level. Press or to view and edit
the parameter for the selec ted command.
MENU BOTTOM You pressed while on the “parameter” level; this is the bottom
level of the menu and you cannot go any lower.
To turn off the menu, press (Menu On/Off). To move up a level,
press .
CHANGE SAVED The change made on th e “parameter” level is saved. This is
displayed after you press (Menu Enter) to execute the command.
MIN VALUE The value you specified on the “parameter” level is too small for the
selected command. The m inimum value allowed is displayed for you to e dit.
MAX VALUE The value you specified on the “parameter” level is too large for th e
selected command. The maximum value allowed is displayed for y ou to edit.
EXITING MENU You wi ll see this message if you turn off the menu by p ressing
(Menu On/Off) or a fr ont-panel function/math key. You did not edit any values
on the “parameter” level and changes were NOT saved.
NOT ENTERED You will see t his message if you turn off the menu by pressin g
(Menu On/Off) or a fr ont-panel function/math key. You did some editing of
parameters but the changes were NOT saved. Press (Menu Enter)
to save changes made on the “parameter” level.
NOT RELEVANT The selected math operatio n is NOT valid for the function in use.
∨
∧
∧
∨
< >
Shift <
Auto/Man
< >
< >
< >
Shift <
Shift
Auto/Man
<
Shift <
Chapter 2 Front-Panel Menu Operation A Front-Panel Menu Tutorial 30