Electrolux ESF63012 If the malfunction shows again, contact the service centre, Malfunction

First try to find a solution to the problem (re- fer to the chart). If not, contact the service centre.

electrolux 13

Malfunction

The appliance does not fill with water.

The appliance does not drain the water.

The programme does not start.

	Fault code	Possible cause
•	The start/cancel indicator	The water tap is
	light flashes.	blocked or is furred with
• The end-of-programme		limescale.
	indicator light flashes one
	time.
		The water pressure is
		too low.
		The water tap is closed.
		The filter in the water in-
		let hose is blocked.
		The connection of the
		water inlet hose is not
		correct.
		The water inlet hose is
		damaged.
•	The start/cancel indicator	There is a blockage in
	light flashes. .	the sink spigot.
• The end-of-programme
	indicator light flashes two
	times.
		The connection of the
		water drain hose is not
		correct.
		The water drain hose is
		damaged.
		The appliance door is
		open.
		The mains plug is not
		connected in.
		Blow out fuse in the
		household fuse box.
		The delay start is set.

Possible solution

Clean the water tap.

Contact your local wa- ter authority.

Open the water tap.

Clean the filter.

Make sure that the connection is correct.

Make sure that the wa- ter inlet hose has no damages.

Clean the sink spigot.

Make sure that the connection is correct.

Make sure that the wa- ter drain hose has no damages.

Close the door correct- ly.

Put in the mains plug.

Replace the fuse.

If you want to cancel the delay start, refer to 'Select and start a washing programme'.

After the check, switch on the appliance. The programme continues from the point of interruption.

If the malfunction shows again, contact the service centre.

For other fault codes, not showed in the chart, contact the service centre.

The necessary data for the service centre is on the rating plate.

We recommend that you write the data here:

Model (MOD.)....................

Product number (PNC) ....................

Serial number (S.N.) ....................